Abstract:The present paper reports the design of a new class of γ / γ ′ containing high-strength CoNi-based superalloys in the Co–Ni–Al system by the addition of Ta and Ti. The designed alloys with compositions Co–30Ni–10Al–2Ta– x Ti (where x = 0, 2, 4 at.%) exhibit a γ / γ ′ microstructure suitable for moderate temperature applications ( 800 °C) requiring exceptional specific strength. The 3D APT compositional analysis of the γ and γ ′ phases indicates a Co-rich matrix, while the ordered γ ′ precipitates are Ni-rich with a stoichiometry of (Ni,Co)3(Al,Ta). The subsequent addition of Ti up to 4 at.% increases the Ni partitioning to the γ ′ precipitates, enhancing their stability. Furthermore, the addition of 4 at.% Ti increases the γ ′ solvus temperature by 170 °C, from 950 to 1120 °C, and concurrently decreases the mass density from 8.50 to 8.34 g/cm 3 . A positive correlation between yield strength and temperature is observed in the Ti-containing alloys, with maximum yield strengths and specific yield strengths of 1025 ± 25 MPa and 122 MPa·g− 1 ·cc, respectively, in the 2Ta2Ti composition, and 1030 ± 20 MPa and 123 MPa·g− 1 ·cc, respectively, in the 2Ta4Ti composition. Long-term stability studies, including microhardness measurements and quantitative assessments of microstructural features, demonstrate excellent microstructural stability and resistance to coarsening in the 2Ta4Ti alloy at 900 °C. This work provides the opportunity to further design low-mass-density CoNi-based alloys with superior performance in the medium-temperature domain required for Advanced Ultra-Super-Critical (AUSC) power plants. This paper is part of a special volume in Journal of Materials Science in honor of Professor Kamanio Chattopadhyay, renowned for his research in our field and his significant contributions to the development of novel alloys for various engineering applications. In his early 60 s, Professor Chattopadhyay's group pioneered the discovery of low-density Co-based superalloys with a γ / γ ' microstructure closely resembling that of Ni-based superalloys. This work involves some of the alloy compositions we conceived during our doctoral thesis work with him.

Development of low-density γ/γ′ Co–Al–Ta-based superalloys with high solvus temperature

High-strength Co–Al–V-base superalloys strengthened by γ′-Co3(Al,V) with high solvus temperature

Development of Co–Ni–Al–V–Ta–Cr-based superalloys with high-temperature strength and excellent oxidation resistance

Effects of Alloying Elements on the Microstructure of Precipitation Strengthened Co-based Superalloys

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Theoretical Exploration of Alloying Effects on Stabilities and Mechanical Properties of γʹ Phase in Novel Co–Al–Nb-Base Superalloys

High-throughput exploration of alloying effects on the microstructural stability and properties of multi-component CoNi-base superalloys

The Temperature Dependence of High-Temperature Strength and Deformation Mechanism in a Single Crystal CoNi-base Superalloy

Design of a Co–Al–W–Ta Alloy Series with Varying γ′ Volume Fraction and Their Thermophysical Properties

L1 2 nanoparticle-strengthened CoNi-based superalloy with ultrahigh yield stress developed using CALPHAD method

Extreme high lattice-misfit superalloys with regular cubic L12 particles and excellent creep resistance

Accelerated design of novel W-free high-strength Co-base superalloys with extremely wide γ/γʹ region by machine learning and CALPHAD methods

L1 2 ‐Strengthened Co‐Rich Alloys for High‐Temperature Structural Applications: A Critical Review

First Principles Study on Structural Stability, Mechanical and Thermodynamic Properties of γ'-Co 3 (V, M) (M=Ti, Ta) Phase

Accelerating design of novel Cobalt‐based superalloys based on first-principles calculations

Microstructure, Mechanical Properties and Thermal Stability of Ni-Based Single Crystal Superalloys with Low Specific Weight

Achieving superior strength and low mass density in a novel γ′ strengthened CoNi-based superalloy

First Principles Study on Structural Stability,mechanical,and Thermodynamic Properties of Γ'-Co3(v,m)(m=ti,ta)phase

Investigation on γ′ stability in CoNi-based superalloys during long-term aging at 900 °C

Effects of Al content on microstructures and high-temperature tensile properties of two newly designed CoNi-base superalloys

Plastic Deformation Behaviors and Mechanical Properties of Advanced Single Crystalline CoNi-base Superalloys