Abstract:The present paper reports the design of a new class of γ / γ ′ containing high-strength CoNi-based superalloys in the Co–Ni–Al system by the addition of Ta and Ti. The designed alloys with compositions Co–30Ni–10Al–2Ta– x Ti (where x = 0, 2, 4 at.%) exhibit a γ / γ ′ microstructure suitable for moderate temperature applications ( 800 °C) requiring exceptional specific strength. The 3D APT compositional analysis of the γ and γ ′ phases indicates a Co-rich matrix, while the ordered γ ′ precipitates are Ni-rich with a stoichiometry of (Ni,Co)3(Al,Ta). The subsequent addition of Ti up to 4 at.% increases the Ni partitioning to the γ ′ precipitates, enhancing their stability. Furthermore, the addition of 4 at.% Ti increases the γ ′ solvus temperature by 170 °C, from 950 to 1120 °C, and concurrently decreases the mass density from 8.50 to 8.34 g/cm 3 . A positive correlation between yield strength and temperature is observed in the Ti-containing alloys, with maximum yield strengths and specific yield strengths of 1025 ± 25 MPa and 122 MPa·g− 1 ·cc, respectively, in the 2Ta2Ti composition, and 1030 ± 20 MPa and 123 MPa·g− 1 ·cc, respectively, in the 2Ta4Ti composition. Long-term stability studies, including microhardness measurements and quantitative assessments of microstructural features, demonstrate excellent microstructural stability and resistance to coarsening in the 2Ta4Ti alloy at 900 °C. This work provides the opportunity to further design low-mass-density CoNi-based alloys with superior performance in the medium-temperature domain required for Advanced Ultra-Super-Critical (AUSC) power plants. This paper is part of a special volume in Journal of Materials Science in honor of Professor Kamanio Chattopadhyay, renowned for his research in our field and his significant contributions to the development of novel alloys for various engineering applications. In his early 60 s, Professor Chattopadhyay's group pioneered the discovery of low-density Co-based superalloys with a γ / γ ' microstructure closely resembling that of Ni-based superalloys. This work involves some of the alloy compositions we conceived during our doctoral thesis work with him.

Achieving superior strength and low mass density in a novel γ′ strengthened CoNi-based superalloy

L1 2 nanoparticle-strengthened CoNi-based superalloy with ultrahigh yield stress developed using CALPHAD method

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

High-throughput exploration of alloying effects on the microstructural stability and properties of multi-component CoNi-base superalloys

Low-Density, High-Temperature Co Base Superalloys

Microstructure, Mechanical Properties and Thermal Stability of Ni-Based Single Crystal Superalloys with Low Specific Weight

Application of Computational Thermodynamics to the Design of a Co-Ni-Based γ′-Strengthened Superalloy

High-strength Co–Al–V-base superalloys strengthened by γ′-Co3(Al,V) with high solvus temperature

Effects of Al content on microstructures and high-temperature tensile properties of two newly designed CoNi-base superalloys

Enhanced high-temperature ductility without strength drop in a lean Co Ni-based superalloy

Development of low-density γ/γ′ Co–Al–Ta-based superalloys with high solvus temperature

Novel Ni–Co-based superalloys with high thermal stability and specific yield stress discovered by directed energy deposition

Alloying effects and effective alloy design of high-Cr CoNi-based superalloys via a high-throughput experiments and machine learning framework

Accelerated design of novel W-free high-strength Co-base superalloys with extremely wide γ/γʹ region by machine learning and CALPHAD methods

High-throughput pseudo-binary diffusion couple approach for alloy design in cobalt-based superalloys

A Strong and Ductile NiCoCr-based Medium-Entropy Alloy Strengthened by Coherent Nanoparticles with Superb Thermal-Stability

Microstructural Evolution of a Newly Developed γ' Strengthened Co-base Superalloy

Investigation on γ′ stability in CoNi-based superalloys during long-term aging at 900 °C

Development of Co–Ni–Al–V–Ta–Cr-based superalloys with high-temperature strength and excellent oxidation resistance

Machine learning assisted design of γ′-strengthened Co-base superalloys with multi-performance optimization

The Temperature Dependence of High-Temperature Strength and Deformation Mechanism in a Single Crystal CoNi-base Superalloy