Abstract:<p>The effects of substituting W with γ′ formers (Al, Ti, Ta, Mo and Nb) on the microstructural stability of a base model alloy Co-20Ni-7Al-8W-1Ta-4Ti were studied using a high-throughput diffusion-multiple approach. A substantial amount of composition-microstructure data was obtained from a single sample, enabling deeper understanding of the alloying effects. It was found that alloy 15Al0W still contains stable γ′ phase at 1000 °C for 1000 h even with a W content of zero. However, the γ′ volume fraction of this alloy was far lower than other W-containing alloys, indicating that W plays an important role on retaining the stability of the γ′ phase. Except for Ti, substituting W with other γ′ forming elements promotes the precipitation of detrimental phases, with a potency of Nb > Ta≈Al > Mo > Ti. The Nb content should be carefully controlled due to its strong effect on inducing the precipitation of the χ phase. The literature data for W-free alloy systems were discussed in comparison to the current W-containing alloy system in order to analyze the role of W in stabilizing the γ′ phase at high temperatures. Furthermore, the γ′ strength and density of more than 300 alloys from the investigated diffusion multiple were analyzed using classic models established for Ni-base superalloys, to guide the alloy design aiming to achieve higher strength to weight ratio. The substitution of W with Ti or Al could significantly reduce the alloy density, but would also decrease the γ′ strength to some extents. These negative effects could be counterbalanced by moderate additions of Ta and Nb. This study will be helpful for the accelerated design of multi-component CoNi-base alloys to achieve light weight and high strength.</p>

Composition design and microstructure of Ni-based single crystal superalloy with low specific weight—numerical modeling and experimental validation

Microstructure, Mechanical Properties and Thermal Stability of Ni-Based Single Crystal Superalloys with Low Specific Weight

Computational Materials Design: Composition Optimization to Develop Novel Ni-based Single Crystal Superalloys

Data-driven design of Ni-based turbine disc superalloys to improve yield strength

Numerical simulation of meso micro structure in Ni based superalloy during liquid metal cooling process

Development of Numerical Simulation in Nickel-Based Superalloy Turbine Blade Directional Solidification

Processing, Microstructures and Mechanical Properties of a Ni-Based Single Crystal Superalloy

Alloying effects and effective alloy design of high-Cr CoNi-based superalloys via a high-throughput experiments and machine learning framework

Study on High Temperature Mechanical Behavior and Microstructure Evolution of Ni3Al-based Superalloy JG4246A

Microstructural Investigations of Ni-Based Superalloys by Directional Solidification Quenching Technique

Phase Field Simulation of Alloying Element Segregation During Solidification of DD5 Nickel-Base Single Crystal Superalloy

A high-throughput strategy for rapid synthesis and characterization of Ni-based superalloys

Coupling high-throughput experiment and machine learning to optimize elemental composition in nickel-based superalloys

Deformation mechanisms of low cycle fatigue of a fourth generation Ni-based single crystal superalloy

High-throughput exploration of alloying effects on the microstructural stability and properties of multi-component CoNi-base superalloys

Multiphase-field and experimental study of solidification behavior in a nickel-based single crystal superalloy

Novel Cast Ni‐based Superalloys with Superb Weldability and Mechanical Properties Screened by a Multi‐Performance‐Oriented Criterion

An intelligent design for Ni-based superalloy based on machine learning and multi-objective optimization

Design of Ni-based turbine disc superalloys with improved yield strength using machine learning

An integrated microporosity model of 3D X-ray micro-tomography and directional solidification simulations for Ni-based single crystal superalloys