Abstract:With the development of accelerator technology, the scale of accelerators is becoming larger, ranging from hundreds of meters to several kilometers. For stable operation of accelerators, high-precision alignment, positioning, and installation are crucial. Installing all equipment inside the tunnel poses safety risks as personnel would be in a closed environment with potential radiation exposure for prolonged periods. To address the challenges of long adjustment and maintenance periods inside the tunnel due to the installation of equipment for large-scale accelerators, most accelerator devices under construction or in research have pre-alignment assemblies. Each assembly consists of a certain number of magnets distributed on girders. The magnets in one cell are pre-aligned with high precision in the laboratory and then transported to the tunnel. Aligning the entire magnet girder can significantly improve installation efficiency inside the tunnel. To meet the pre-alignment accuracy requirement of 10 micrometers in the horizontal and vertical directions for the magnet cells in the High Energy Photon Source (HEPS) storage ring, a system for high-precision pre-alignment of accelerator cells using four total stations for angle observation has been designed in this paper. By employing different instrument layout configurations and incorporating reliable distance benchmarks, high-precision pre-alignment of the magnet cells are achieved. By arranging targets and utilizing recognition for automatic targeting, real-time point calculations during pre-alignment enhance efficiency. Subsequently, based on this system, pre-alignment simulation calculations and experimental verification of eight magnet FODO(Focusing-Defocusing) cells in the HEPS storage ring are conducted and ultimately realizing the 10 μm transverse and vertical pre-alignment measuring error within the cells. This method, based on high-precision measurements in a small-scale space, reduces the period required for personnel on-site and improves pre-alignment efficiency. It also provides a reference for pre-alignment of multiple magnet cells in large accelerators such as the Southern Advanced Photon Source (SAPS) and Circular Electron Positron Collider (CEPC).

Alignment strategy for IFMIF-DONES facility

Update of the 5 MW Beam-on-Target Requirements for improvement of the materials irradiation performance at IFMIF-DONES

TRL analysis of IFMIF-DONES

Engineering design status of IFMIF-DONES High Energy Beam Transport line and Beam Dump system inside the TIR and RIZ

Shielding optimization to reduce the radiation field in the accelerator systems of IFMIF-DONES

Automatic rough alignment for key components in laser driven experiments using fiducial markers

Neutronic assessment of the IFMIF-DONES HFTM specimen stack distribution

Optimization and evaluation of structural and shielding concrete for IFMIF-DONES

High-precision Spatial Measurement Method of Accelerator Pre-Alignment Based on Multiple Total Stations

Production of 177Lu with deuterons at IFMIF-DONES facility

Updates of the removable biological shielding blocks inside of the test cell, part of the test systems of IFMIF-DONES

Status of the engineering design of the IFMIF-DONES high energy beam transport line and beam dump system

Comparison of chamber beam geometry robustness to mispointing, imbalance and target offset for direct-drive laser fusion facilities

The IFMIF-DONES Diagnostics and Control Systems: Current Design Status, Integration Issues and Future Perspectives Embedding Artificial Intelligence Tools

A nine-degree-of-freedom optimization-based method to evaluate the isocenter coincidence of the treatment beams and image system of a medical accelerator

An Efficient Procedure to Compensate for the Errors Due to the Probe Mispositioning in a Cylindrical Near-Field Facility

Failure mode and effect analysis oriented to risk-reduction interventions in intraoperative electron radiation therapy: the specific impact of patient transportation, automation, and treatment planning availability

Production of 177Lu at the IFMIF-DONES Facility

High-Precision Spatial Measurement Method of Accelerator Cell Pre-alignment Based on Multiple Total Stations

Neutronic analysis of IFMIF-DONES test cell cooling system

Analyzing Misalignment Tolerances for Implicit Electric Field Conjugation