Abstract:Background: Photo-neutrons are produced at the head of the medical linear accelerators (linac) by the interaction of high-energy photons, and patients receive a whole-body-absorbed dose from these neutrons. The current study aimed to find an efficient shielding material for fast neutrons. Methods: Nanoparticles (NPs) of Fe3O4 and B4C were applied in a matrix of silicone resin to design a proper shield against fast neutrons produced by the 18 MeV photon beam of a Varian 2100 C/D linac. Neutron macroscopic cross-sections for three types of samples were calculated by the Monte Carlo (MC) method and experimentally measured for neutrons of an Am-Be source. The designed shields in different concentrations were tested by MCNPX MC code, and the proper concentration was chosen for the experimental test. A shield was designed with two layers, including nano-iron oxide and a layer of nano-boron carbide for eliminating fast neutrons. Results: MC simulation results with uncertainty less than 1% showed that for discrete energies and 50% nanomaterial concentration, the macroscopic cross-sections for iron oxide and boron carbide at the energy of 1 MeV were 0.36 cm- 1 and 0.32 cm- 1, respectively. For 30% nanomaterial concentration, the calculated macroscopic cross-sections for iron oxide and boron carbide shields for Am-Be spectrum equaled 0.12 cm- 1 and 0.15 cm- 1, respectively, while they are 0.15 cm- 1 and 0.18 cm- 1 for the linac spectrum. In the experiment with the Am-Be spectrum, the macroscopic cross-sections for 30% nanomaterial concentration were 0.17 ± 0.01 cm- 1 for iron oxide and 0.21 ± 0.02 cm- 1 for boron carbide. The measured transmission factors for 30% nanomaterial concentration with the Am-Be spectrum were 0.71 ± 0.01, 0.66 ± 0.02, and 0.62 ± 0.01 for the iron oxide, boron carbide, and double-layer shields, respectively. In addition, these values were 0.74, 0.69, and 0.67, respectively, for MC simulation for the linac spectrum at the same concentration and thickness of 2 cm. Conclusion: Results achieved from MC simulation and experimental tests were in a satisfactory agreement. The difference between MC and measurements was in the range of 10%. Our results demonstrated that the designed double-layer shield has a superior macroscopic cross-section compared with two single-layer nanoshields and more efficiently eliminates fast photo-neutrons.

Shielding optimization to reduce the radiation field in the accelerator systems of IFMIF-DONES

Engineering design status of IFMIF-DONES High Energy Beam Transport line and Beam Dump system inside the TIR and RIZ

Updates of the removable biological shielding blocks inside of the test cell, part of the test systems of IFMIF-DONES

Optimization and evaluation of structural and shielding concrete for IFMIF-DONES

Update of the 5 MW Beam-on-Target Requirements for improvement of the materials irradiation performance at IFMIF-DONES

Radiation transport calculations for the European Spallation Source accelerator environment

Nuclear analysis and shielding optimisation in support of the ITER In-Vessel Viewing System design

Status of the engineering design of the IFMIF-DONES high energy beam transport line and beam dump system

Evaluation of the radiation field and shielding assessment of the experimental area of HIE-ISOLDE

Neutron and Gamma-Ray Transport Calculations in Support of the Design of the Radiation Shielding for the TOFED Neutron Spectrometer at LHD

Neutronic analysis of IFMIF-DONES test cell cooling system

Design development and implementation of an irradiation station at the neutron time-of-flight facility at CERN

Neutronic Assessment of Candidate Materials for TF Coils Shielding in a DEMO Fusion Reactor Based on a DCLL Blanket

Neutronic assessment of the IFMIF-DONES HFTM specimen stack distribution

Photon and neutron dose evaluation at the beam test facility of the INFN - National laboratory of Frascati

Effect of the oblique incidence of radiation beams on emerging radiation behind lead and concrete shields: a multilayer method for dose transmission calculations

Radiation shielding design of the CFETR polarimeter interferometer and CO2 dispersion interferometer

Production of 177Lu with deuterons at IFMIF-DONES facility

Design and fabrication of a Nano-based neutron shield for fast neutrons from medical linear accelerators in radiation therapy

Nuclear analysis for the Test Cell Lithium System Interface Cell during operation and shutdown

RADIATION PROTECTION CALCULATION AND OPTIMIZATION FOR SHIELDING DESIGN AROUND THE REFUELING PIPELINES OF HTR-PM