Abstract:In this work, Mg-10 wt% Ni (M) with higher theoretical hydrogen production is taken as the research object. M - 10C (M = Mg10Ni, C = EG (expandable graphite), SnO2 (stannic oxide), EG-SnO2) composites with various compositions were integrated by high-energy ball milling (HEBM), and their H-2 production behavior in simulated seawater were investigated. Not only did X-ray analysis and scanning electron microscopy techniques be used to study the phase composition diffraction pattern and surface morphology of these Mg-based composites in detail, but also the performance and mechanism of hydrogen generation are investigated by initial hydrolysis kinetics. The results demonstrate that the addition of hollow SnO2 nanotubes and lamellar EG to the M alloy make surface loose and porous, and the existing cracks and gaps can increase hydrolysis channels with rapid medium transfer, thereby improving the initial reaction kinetics and the final hydrogen production rates. M - 10C (M = Mg10Ni, C = EG, SnO2, EG-SnO2) composites can produce 98.207, 69.996, 58.235 mL.g(-1) H-2 within 15 s at 291 K, which are higher than M alloy without any catalyst (38.151 mL.g(-1) H-2). It is worth noting that M-10SnO(2) rapidly release 395.4 mL.g(-1) H-2 with 51.35% yield in 2 min at 298 K. The difference between the H-2 generation yields is mainly originated from the activity of catalysts on nucleation and growth of Mg(OH)(2) in the hydrolysis reaction stage. Moderate initial nucleation rate and the subsequent sufficient growth of Mg(OH)(2) nucleus are prerequisites to ensure fast initial hydrogen production rate and high H-2 generation yield. Catalysis is an effective means to ameliorate the hydrogen performance of Mg-based alloys, and it is important to choose the appropriate catalyst type. However, the degree of catalysis determined by the content of the catalyst and the manner of addition is also worthy of attention. (C) 2021 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Tailoring the hydrogen production behavior of Al-Zn-Sn alloys through their as-solidified microstructures

The Role of Microstructural Length Scale in Hydrogen Generation Features of an Al-Sn-Fe Alloy

Development of Ti–Zr–Mn–Cr-(V–Fe) Based Alloys for Hydrogen Feeding System in Hydrogen Metallurgy Application

Study on the modification of Zr-Mn-V based alloys for hydrogen isotopes storage and delivery

Hydrogen production performance of an Al-Ga-In-Sn quaternary alloy

Hydrolysis-Based Hydrogen Generation Investigation of Aluminum System Adding Low-Melting Metals

Enhanced Hydrogen Generation Performance of Al-Rich Alloys by a Melting-Mechanical Crushing-Ball Milling Method

Development of Cost-Effective Sn-Free Al-Bi-Fe Alloys for Efficient Onboard Hydrogen Production through Al–Water Reaction

Experimental Study on the Effect of Low Melting Point Metal Additives on Hydrogen Production in the Aluminum–water Reaction

Molten Salt-Enhanced Production of Hydrogen by Using Skimmed Hot Dross from Aluminum Remelting at High Temperature

Sn-free Al-based on-demand hydrogen production materials for easy recycling

Enhanced hydrogen generation from Al-water reaction mediated by metal salts

Mild hydrogen production from the hydrolysis of Al–Bi–Zn composite powder

Solidification microstructure of Zn-(0-6.0%)Al-4%Sb alloys used for hot-dip galvanizing

Metal Substrate Enhanced Hydrogen Production of Aluminum Fed Liquid Phase Ga–In Alloy Inside Aqueous Solution

Instant Hydrogen Production Using Ga-In-Sn-Bi Alloy-Activated Al-water Reaction for Hydrogen Fuel Cells

Hydrogen Generation from the Reaction of Al-based Composites Activated by Low-Melting-point Metals/oxides/salts with Water

Preparation of Al-3Ga-3In-3Sn Alloy Powder by Coupling Alloying and Ball Milling and Its Application on High-Rate Hydrogen Generation at Room Temperature

Fabrication of Al-Ni Alloys for Fast Hydrogen Production from Hydrolysis in Alkaline Water

Hydrogen generation by the hydrolysis of mechanochemically activated aluminum-tin-indium composites in pure water

Hydrolysis H2 Generation of Mg–Ni Alloy Catalyzed by Expandable Graphite/stannic Oxide