Abstract:Hydrogen has become a promising energy source due to its efficient and renewable properties. Although promising, hydrogen energy has not been in widespread use due to the lack of high-performance materials for hydrogen storage. Previous studies have shown that the addition of Al-based compounds to LiBH4 can create composites that have good properties for hydrogen storage. In this work, the dehydrogenation performances of different composite systems of 2LiBH4+ M (M = Al, LiAlH4, Li3AlH6) were investigated. The results show that, under a ball to powder ratio of 25:1 and a rotation speed of 300 rpm, the optimum ball milling time is 50 h for synthesizing Li3AlH6 from LiH and LiAlH4. The three studied systems destabilized LiBH4 at relatively low temperatures, and the 2LiBH4-Li3AlH6 composite demonstrated excellent behavior. Based on the differential scanning calorimetry results, pure LiBH4 released hydrogen at 469°C. The dehydrogenation temperature of LiBH4 is 416°C for 2LiBH4-Li3AlH6 versus 435°C for 2LiBH4-LiAlH4 and 445°C for 2LiBH4-Al. The 2LiBH4-Li3AlH6, 2LiBH4-LiAlH4, and 2LiBH4-Al samples released 9.1, 8, and 5.7 wt.% of H2, respectively. Additionally, the 2LiBH4-Li3AlH6 composite released the 9.1 wt.% H2 within 150 min. An increase in the kinetics was achieved. From the results, it was concluded that 2LiBH4-Li3AlH6 exhibits the best dehydrogenation performance. Therefore, the 2LiBH4-Li3AlH6 composite is considered a promising hydrogen storage material.

Mild hydrogen production from the hydrolysis of Al–Bi–Zn composite powder

Design and Fabrication of High Activity Retention Al-Based Composite Powders for Mild Hydrogen Generation

Hydrogen Generation and Stoichiometric Hydrolysis of Core–shell Al-Li-NaBH4 Composite

Hydrogen Generation from the Reaction of Al-based Composites Activated by Low-Melting-point Metals/oxides/salts with Water

Effect of Fe on the Hydrogen Production Properties of Al-Bi-Sn Composite Powders

Study on Hydrogen Generation from the Hydrolysis of a Ball Milled Aluminum/calcium Hydride Composite

High efficiency Al-based multicomponent composites for low-temperature hydrogen production and its hydrolysis mechanism

Instant Hydrogen Production Using Ga-In-Sn-Bi Alloy-Activated Al-water Reaction for Hydrogen Fuel Cells

Integrated design of hydrogen production and thermal energy storage functions of Al-Bi-Cu composite powders

Hydrolysis of ball milling Al–Bi–hydride and Al–Bi–salt mixture for hydrogen generation

Dehydrogenation Performances of Different Al Source Composite Systems of 2libh4 + M (M = Al, LiAlH4, Li3AlH6).

Development of Cost-Effective Sn-Free Al-Bi-Fe Alloys for Efficient Onboard Hydrogen Production through Al–Water Reaction

Improved Hydrogen Generation from the Hydrolysis of Aluminum Ball Milled with Hydride

A high activity Al–Bi@C for hydrogen generation from Al-water reaction

Hydrogen generation from the hydrolysis of Mg powder ball-milled with AlCl3

Enhanced hydrogen generation from Al-water reaction mediated by metal salts

In situ hydrogen production from Al–BiCl 3 hydrolysis for small-sized fuel cell

Hydrogen Generation from Mg–LiBH4 Hydrolysis Improved by AlCl3 Addition

Effect of Salts Addition on the Hydrogen Generation of Al–LiH Composite Elaborated by Ball Milling

Experimental Study on the Effect of Low Melting Point Metal Additives on Hydrogen Production in the Aluminum–water Reaction

Effect of temperature on hydrogen generation and hydrolysis mechanism of Al–Sn–Bi composite materials