Abstract:Zr2WP2O12 is an effective filler for Polyphenylene oxide (PPO) based thermosetting polymer systems for controlling thermal expansion and improving dielectric performance, which provides more opportunities for PPO based composites to be used as packaging materials for high‐frequency applications. The mismatch of coefficient of thermal expansion (CTE) of components has created numerous reliability issues in electronic packages. Incorporating inorganic fillers into polymer matrices has been proven to be an effective way to reduce the CTE, but properly balancing CTE with other key properties of the composites is still a challenge. In the current work, negative thermal expansion Zr2WP2O12 (ZWP) particles were prepared by a high‐temperature solid‐phase synthesis method. Polyphenylene oxide (PPO)‐based composites with different volume fractions (0, 10, 20, 30 vol%) of ZWP particles were prepared and their thermal expansion and dielectric properties were characterized. PPO/silica composites with the same volume fractions of silica were also prepared and characterized for comparison. With the content of filler increased from 0 to 30 vol%, the CTE of the PPO/ZWP composites reduced from 74.2 to 45.4 ppm/°C, which is more significant than that of the PPO/silica composites (48.0 ppm/°C with 30 vol% silica). Meanwhile, the dielectric loss of PPO/ZWP composites decreased significantly from 0.0024 (0 vol% ZWP) to 0.0018 (30 vol% ZWP) at 10 GHz, which is better than PPO/silica composites (0.0019 with 30 vol% Silica). The PPO/ZWP composites exhibit excellent comprehensive properties, which may be promising materials for high‐frequency applications in electronic packaging fields.

Preparation of Negative Thermal Expansion ZrW2O8 Powders and Its Application in Polyimide/ZrW2O8 Composites

Dielectric Properties and Thermal Expansion of ZrW2 O8 /polyimide Hybrid Films

Ultra‐low loss polyphenylene oxide‐based composites with negative thermal expansion fillers

Near-zero thermal expansion of ZrW2O8/Al–Si composites with three dimensional interpenetrating network structure

Zr 1− X Yb X WMoO 8− X /2 ( X = 0, 0.04) Ceramics Fabricated by in Situ Synthesis from Trigonal Polymorph: Preparation, Sintering Process, and Negative Thermal Expansion Properties

Preparation and negative thermal expansion in medium-entropy ceramics (Zr1/3Hf1/3Ti1/3)V2O7

Properties of polyphenylene sulphide/glass fibre composites with negative thermal expansion ceramic fillers

First-Principles Structural, Mechanical, and Thermodynamic Calculations of the Negative Thermal Expansion Compound Zr2(WO4)(PO4)2

Construction of zirconium tungstate modified polymer bonded energetic composites with highly inhibited thermal expansion via bioinspired interfacial reinforcement

Negative thermal expansion in a zirconium tungstate/epoxy composite at low temperatures

ZrW2O8 with Negative Thermal Expansion Fabricated at Ultralow Temperature: an Energy-Efficient Strategy for Metastable Material Fabrication

Negative thermal expansion in α-Zr2SP2O12 based on phase transition- and framework-type mechanisms

Isotropic negative thermal expansion in ZrW2O8 and HfW2O8 from 1100 to 1275°C

Fabrication of metal matrix composites with negative thermal expansion zinc pyrophosphate filler

Design and Modulation of Negative Thermal Expansion for Epoxy Polymers

ZrW2O8/ZrO2 Composites with Low/Near-Zero Coefficients of Thermal Expansion Fabricated at Ultralow Temperature: an Integration of Hydrothermal Assembly and a Cold Sintering Process

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Zero thermal expansion, high specific thermal conductivity, and good machinability of Cu2P2O7/2024Al composite

Effects of the Liquid Phase Content on the Microstructure and Properties of the ZrW2O8 Ceramics with Negative Thermal Expansion Fabricated by the Cold Sintering Process

Efficient Calculation of the Negative Thermal Expansion in ZrW2O8

Thermal Expansion Coefficients of Sm<sub>2</sub>Zr<sub>2</sub>O<sub>7</sub> Doped with MgO