Abstract:Hybrid fillers to build an efficient thermal conductivity network. Traditional integrated circuit (IC) packaging materials and printed circuit board substrate materials suffer from several limitations including low thermal conductivity, high coefficient of thermal expansion (CTE), and poor dielectric properties. Although significant efforts have been made to enhance these properties, achieving a single composite system with simultaneous high thermal conductivity, extremely low CTE, and dielectric loss remains a formidable task. In this study, we propose a hybrid polymer composite system that addresses these challenges. Our approach involves utilizing a thermosetting polyphenylene oxide (PPO) as the resin matrix, while incorporating boron nitride (BN) sheets with high thermal conductivity and alumina (Al2O3) spheres with favorable fluidity as fillers. To optimize the composite properties, the filler surfaces are modified using dopamine and silane coupling agents, ensuring proper interface control. The composites exhibit significant improvements in thermal conductivity, reduced dielectric loss and CTE, while maintaining excellent processibility. Specifically, with a composition of 25 vol% BN and 25 vol% Al2O3, the thermal conductivity of the composite reaches 2.18 W·m−1 K−1, surpassing neat PPO resin by a factor of 10.9. Simultaneously, the CTE decreases from 2.27% to 1.18% between 50 and 260°C, and the dielectric loss reduces from 0.0024 to 0.0011 at 10 GHz, as compared to neat PPO resin. Highlights The reported novel hybrid composite offers a promising solution to the limitations of traditional IC packaging materials. The reported hybrid composite exhibits significantly improved thermal conductivity, ultralow dielectric loss, and reduced coefficient of thermal expansion, while maintaining excellent processibility. The thermal conductivity of the composites reaches 2.18 W·m−1 K−1, surpassing that of the neat resin by a factor of 10.9, meanwhile the dielectric loss is as low as 0.0011 at 10 GHz, which is extremely difficult to achieve simultaneously for thermosetting polymer composites. Synergetic effects were realized with the hybridization of fillers with different dimensionality, and proper filler surface modification.

Ultra‐low loss polyphenylene oxide‐based composites with negative thermal expansion fillers

Properties of polyphenylene sulphide/glass fibre composites with negative thermal expansion ceramic fillers

Preparation of Negative Thermal Expansion ZrW2O8 Powders and Its Application in Polyimide/ZrW2O8 Composites

Polyphenylene oxide/boron nitride–alumina hybrid composites with high thermal conductivity, low thermal expansion and ultralow dielectric loss

Near-zero thermal expansion of ZrW2O8/Al–Si composites with three dimensional interpenetrating network structure

Properties of low loss ZrTi2O6 filled PTFE composite substrates

The dielectric and thermal properties of Mn-doped (1 − x) ZrTi 2 O 6 –xZnNb 2 O 6 filled PTFE composites

Surface-modified Li3Mg2NbO6 ceramic particles and hexagonal boron nitride sheets filled PTFE composites with high through-plane thermal conductivity and extremely low dielectric loss

Low Loss and High Permittivity Composites Based on Poly(vinylidene Fluoride-Chlorotrifluoroethylene) and Lead Lanthanum Zirconate Titanate

Dielectric Properties and Thermal Expansion of ZrW2 O8 /polyimide Hybrid Films

Improved dispersion and interfacial interaction of SiO2@polydopamine fillers in polytetrafluoroethylene composites for reduced thermal expansion and suppressed dielectric deterioration

Fabrication of metal matrix composites with negative thermal expansion zinc pyrophosphate filler

Modified poly(phenylene oxide)/(CaSr)TiO 3 composites with ultrahigh permittivity and low loss for microwave substrates

Modified BCZN Particles Filled PTFE Composites with High Dielectric Constant and Low Loss for Microwave Substrate Applications

Novel Three-Dimensional Zinc Oxide Superstructures for High Dielectric Constant Polymer Composites Capable of Withstanding High Electric Field

Prominent Nonlinear Electrical Conduction Characteristic in T-Znow/Ptfe Composites with Low Threshold Field

Improved coefficient thermal expansion and mechanical properties of PTFE composites for high-frequency communication

High Microwave Dielectric Constant and Improved Thermal Stability of Functionalized Zn0.15Nb0.3Ti0.55O2-filled Polyolefin Composites

Surface-modified Zn0.5Ti0.5NbO4 particles filled polytetrafluoroethylene composite with extremely low dielectric loss and stable temperature dependence

Modified Poly(phenylene Oxide)/(casr)tio3 Composites with Ultrahigh Permittivity and Low Loss for Microwave Substrates

High-performance Zero Thermal Expansion in Al Metal Matrix Composites