Abstract:The state-of-the-art graphite foams (GFs) are afflicted by large bulk density and low thermal conductivity, restricting their practical application. To alleviate the above problem, herein, an issue-oriented scheme, i.e., an in situ titanium (Ti) assisted catalytic graphitization strategy was proposed by using AR mesophase pitch (ARMP) as a precursor. In a typical preparation process, the mixture of Ti and ARMP underwent a pressurized foam, carbonization, and graphitization procedure successively to obtain GFs. The results showed that the Ti content played an important role in the development of the graphitic microcrystal structure due to the catalytic graphitization of Ti. According to the XRD analysis and molecular dynamics (MD) simulation, we confirmed that Ti promoted graphitization mainly by the generation of TiC during the high-temperature graphitization. The GFs obtained with 11 wt% Ti exhibited the most perfect graphitic crystal structure, with the highest graphitization degree. Thanks to the improved graphitization degree, the thermal conductivity of GFs increased with the added amount of Ti increasing from 0 to 11 wt%. The highest thermal conductivity of 60.8 W m-1 K-1 and the low bulk density of 0.36 g cm-3 could be achieved when the addition amount of Ti was 11 wt%. Meanwhile, apart from the optimization of thermal conductivity and bulk density, the compressive strength was also enhanced as the amount of Ti increased from 0 to 15 wt%. Our work provided a facile and scalable approach to preparing GFs with low density and high thermal conductivity.

Graphite flakes/UO2 fuel pellets with excellent thermal conductivity in radial direction

Sintering behavior and thermal conductivity of graphite flakes/uranium dioxide composites

Fabrication of UO2-BeO composite pellets with superior thermal conductivity based on multi-parameter theoretical analyses

Thermal conductivity of UO2 pellets enhanced by a semi-continuous structure of Ti3SiC2

In-situ synthesized nanocrystalline UO2/SiC composite with superior thermal conductivity

A novel class of ATF fuels with large grain size, enhanced thermophysical properties and oxidation resistance

Synthesis of composite of graphene and UO3 composite via one-step solution chemical reaction and its application to UO2-based accident tolerant fuel

Flash sintering of UO 2 pellets for nuclear fuel and wasteform applications

Pulverization and Spheroidization of Natural Graphite Powder for the Matrix Graphite in High-Temperature Gas-Cooled Reactors

Hydrothermal synthesis of uranium dioxide and graphene composite and its application as an additive for uranium-dioxide-based accident tolerant fuel

Microstructure and Thermophysical Properties of Er2O3-doped UO2 Ceramic Pellets

Treatment of UO2 Pellets Used for Preparing Fuel Elements of HTR-10 Followed by Supercritical Fluid Extraction

UO2–Mo–Be composites for Accident Tolerant Fuel: SPS fabrication, microcracks-free in as-fabricated state and superior thermal conductivity

Numerical Analysis of Effective Thermal Conductivity of FCM with Multilayer TRISO Particle

High-entropy carbide ceramics with refined microstructure and enhanced thermal conductivity by the addition of graphite

In situ Ti assisted graphitization approach for the preparation of graphite foam with light weight and high thermal conductivity

Improvement on the thermal cracking performance of pellets prepared from ultrafine iron ore

Improved thermal shock resistance of magnesia-graphite refractories by the addition of MgO-C pellets

Interfacial microstructure and thermal resistance of UO2/Mo composites fabricated by spark plasma sintering

Research on Graphite Powders Used for HTR-PM Fuel Elements

Fabrication of Matrix Graphite with a High Degree of Graphitization for Spherical Fuel Elements by Using Natural Microcrystalline Graphite Fillers