Abstract:With the increasing severity in the service environment of secondary refining furnaces, traditional refractories cannot meet the high requirements. MgO-based fired refractories are subject to the thermal shock effect and slag penetration which are detrimental to their performance. In this study, low-carbon MgO-based refractories are reinforced by an in-situ MgAl2O4(MA)-TiO2 dense layer with the addition of low-cost self-prepared titanium carbonitride [Ti(C, N)]. The influence of the addition of as-prepared Ti(C, N) on the properties of low-carbon MgO-based refractories was investigated. The reinforced refractories had no cracks after 190 thermal shock cycles, demonstrating the highest hot modulus of rupture (HMOR) with excellent thermal shock resistance (TSR). After 2.5 h of rotary immersion in a steel slag, the corrosion depth of the composites was only 26.3% of that of commercial MgO-CaO refractories. Based on the thermodynamic analysis, the Ti(C, N) reinforcement mechanism for the low-carbon MgO-based refractories was studied. A MA-TiO2 dense layer formed during the oxidation process of the composites which enhanced the oxidation resistance. The volume expansion caused by the partial oxidation of Ti(C, N) prevents the penetration of the molten slag to refractories and Ti(C, N) powders forming a protective layer to further effectively protect the composites from slag corrosion owing to its high surface area. In addition, 3CaO·2TiO2 formed by the reaction between the steel slag and Ti(C, N) further increased the slag corrosion resistance (SCR) of the composites. This research offers a new idea for the material selection for secondary refining furnaces to achieve a green and effective steel-making production route and enriches the understanding of the phase behaviour in the Mg-Al-Ti-C-O-N system under high temperatures.

Improved thermal shock resistance of magnesia-graphite refractories by the addition of MgO-C pellets

A New Approach to Fabricate MgO-C Refractories with High Thermal Shock Resistance by Adding Artificial Graphite

Fabrication of Y2O3-doped MgO Refractory Raw Materials Based on Magnesium Hydroxide from Salt-Lake Brine

Improved thermal shock resistance of MgO–C refractories with addition of calcium magnesium aluminate (CMA) aggregates

Mechanical Behavior and Thermal Shock Resistance of MgO-C Refractories: Influence of Graphite Content

Enhanced performance of low-carbon MgO–C refractories with nano-sized ZrO2–Al2O3 composite powder

Effect of C/MgO nanocomposite powders on the properties of low-carbon MgO–C refractories

Improved properties of in-situ MgAl2O4-TiO2 dense layer reinforced low-carbon MgO-based refractories

Simultaneous enhance of the thermal shock resistance and slag-penetration resistance for tundish flow-control refractories: the role of microporous magnesia

Development and characterization of nano-magnesia-based refractories filled with graphite nanosheets

Effect of stainless steel fibers on properties of MgO–C refractories

Designing low-carbon MgO–Al2O3–La2O3–C refractories with balanced performance for ladle furnaces

Improved thermal shock resistance of low-carbon Al2O3–C refractories fabricated with C/MgAl2O4 composite powders

Fracture Behavior of Low Carbon MgO–C Refractories Using the Wedge Splitting Test

Influence of graphite content on fracture behavior of MgO–C refractories based on wedge splitting test with digital image correlation method and acoustic emission

Improved oxidation resistance while maintaining slag corrosion resistance of MgO–SiC–C refractories with moderate amounts of liquid phase

Enhanced performance of ultra-low carbon MgO–C bricks by the addition of special C/MgAl2O4 composite powders

Molten salt synthesis of Cr3C2-coated flake graphite and its effect on the physical properties of low-carbon MgO–C refractories

Improved thermal shock stability and oxidation resistance of low-carbon MgO–C refractories with introduction of SiC whiskers

Preparation, properties, and interfacial bonding mechanism of MgO–Mg2SiO4–SiC–C refractories

Cr7C3: A potential antioxidant for low carbon MgO–C refractories