Abstract:Alloying has been considered as an effective strategy to make up for the poor oxidation corrosion resistance of U3Si2. However, the theoretical studies on alloyed U3Si2 are rarely reported. In this study, the structural, electronic, elastic and thermal properties of 10at% Cr-doped U3Si2 were studied using first principles calculations and semiclassical Boltzmann transport theory. Our results show that the U3Si1.5Cr0.5 phase is determined to be thermodynamically, dynamically and elastically stable, and U2.5Si2Cr0.5 phase is dynamically and elastically stable. U3Si1.5Cr0.5 is more stable than U2.5Si2Cr0.5 from the thermodynamic calculation results. From the calculated electronic structure results, a mixture of ionic and metallic bonds dominates the bonding of Cr-doped U3Si2. They are ductile materials compared to the brittleness of U3Si2 according to the results of B/G ratio, Cauchy pressure and Poisson's ratio. Moreover, U3Si1.5Cr0.5 is a nearly elastic isotropic material, while U2.5Si2Cr0.5 exhibits strong anisotropy. The thermal conductivity of Cr-alloyed U3Si2 is dominated by the electronic contribution at high temperature, which is lower than U3Si2 but higher than UO2 at service temperature and increases with temperature. Therefore, in addition to significantly improving the resistance to oxidation and corrosion of U3Si2, Cr doping can also convert the brittleness of U3Si2 into toughness and improve its machinability, albeit at the reasonable expense of some mechanical properties and thermal conductivities, while maintaining the high uranium density of U3Si2 fuel form. The results of this work may provide useful clues for the application and improvement of uranium silicide fuels.

Thermal conductivity of UO2 pellets enhanced by a semi-continuous structure of Ti3SiC2

In-situ synthesized nanocrystalline UO2/SiC composite with superior thermal conductivity

Graphite flakes/UO2 fuel pellets with excellent thermal conductivity in radial direction

Fabrication of UO2-BeO composite pellets with superior thermal conductivity based on multi-parameter theoretical analyses

Interfacial microstructure and thermal resistance of UO2/Mo composites fabricated by spark plasma sintering

Microstructure and Thermophysical Properties of Er2O3-doped UO2 Ceramic Pellets

Columbite-rich Multiphase TiO2 Nanoceramic with Superior Mechanical and Dielectric Properties

Research Progress of Hyperstoichiometric UO2Crystals

Structural, Electronic, Elastic and Thermal Properties of Cr-doped U3Si2: A DFT Study

Sintering behavior and thermal conductivity of graphite flakes/uranium dioxide composites

Enhanced Thermoelectric Performance of In2O3-based Ceramics Via Nanostructuring and Point Defect Engineering.

Sintering And Thermal Properties Of Multiwalled Carbon Nanotube-Batio3 Composites

Enhancing Ablation Resistance of TaB2-Based Ultra-High Temperature Ceramics by Mixing Fine TaC Particles and Dispersed Multi-Walled Carbon Nanotubes

The Effect of Fission Products Xe and Cs on the Thermal Conductivity of the U3Si2lattice: a First-Principles Study.

A distinct structure of TiC for electromagnetic interference shielding and thermal stability of SiTiOC ceramic nanocomposites

A novel class of ATF fuels with large grain size, enhanced thermophysical properties and oxidation resistance

Phase Field Simulations of the Sintering Process of UO2

Microstructural Evolution of Gas Bubbles and Thermal Conductivity in UO2-BeO Bicrystal

Ablation resistance behavior of ZrB2-SiC ultra-high temperature ceramics with Y2O3 addition

Phase-field Simulation of Recrystallization and Calculation of the Effective Thermal Conductivity of Polycrystalline UO2

Numerical Analysis of Effective Thermal Conductivity of FCM with Multilayer TRISO Particle