Abstract:The three-dimensional (3D) microstructure of neutron-irradiated uranium-10 wt.% molybdenum (U-10Mo) fuel with a burn-up of 9.8×10 21 fissions/cm 3 was characterized using a novel, multi-modal synchrotron micro-computed tomography approach combining propagation-based phase-contrast enhanced and absorption contrast techniques. The porosity development, porosity interconnectedness, swelling, composition, local thickness of the zirconium (Zr) diffusion barrier, and the influence of the fuel–cladding interaction on the local composition and pore morphology, were uniquely determined in 3D. Two cuboids were produced using a focused ion beam-scanning electron microscope at the Zr diffusion barrier–fuel interface and in the bulk fuel. The bulk fuel sample swelled by 53.3[+9.7/-3.1]%, while the fuel near the Zr–fuel interface swelled by 63.3[+14.7/-7.2]%. The average local thickness of the Zr diffusion barrier decreased by 53%, compared to the expected pre-irradiated thickness. Four pore morphology regions were identified initiating parallel to the fuel–Zr interaction region: (1) an interaction layer of suppressed porosity, (2) a layer of elongated and interconnected porosity, (3) a transition zone of low porosity, and (4) a layer of unoriented porosity representative of the bulk fuel behavior. The increase in porosity near the diffusion barrier corresponded to a higher U concentration compared to that in the bulk fuel. The interconnected porosity in the fuel near the diffusion barrier was extensive and oriented parallel to the diffusion barrier, while the bulk fuel had more compact and isolated pore networks. The interaction layer, despite having suppressed porosity, was nearly 100 wt.% U. Porosity suppression at the diffusion barrier corresponds to the expected reduction in radiation-driven diffusion of Xe at the interface despite the anticipated increase in fission product nucleation originating from a higher U concentration. The novel 3D insights of the porosity, swelling, and compositional variations characterized herein can improve the fidelity of fuel performance codes for proliferation-resistant fuels for research and test reactors.

Interfacial microstructure and thermal resistance of UO2/Mo composites fabricated by spark plasma sintering

Fabrication of UO2-BeO composite pellets with superior thermal conductivity based on multi-parameter theoretical analyses

UO2–Mo–Be composites for Accident Tolerant Fuel: SPS fabrication, microcracks-free in as-fabricated state and superior thermal conductivity

UO2/BeO interfacial thermal resistance and its effect on fuel thermal conductivity

Thermal conductivity of UO2 pellets enhanced by a semi-continuous structure of Ti3SiC2

Sintering behavior and thermal conductivity of graphite flakes/uranium dioxide composites

In-situ synthesized nanocrystalline UO2/SiC composite with superior thermal conductivity

Microstructural Evolution of Gas Bubbles and Thermal Conductivity in UO2-BeO Bicrystal

Bi-objective optimization of thermal conductivity and thermal stress of UO 2 –Mo–Nb composite through Gaussian process regression and NSGA-II method

Interface interactions in UN-X-UO2 systems (X = V, Nb, Ta, Cr, Mo, W) by pressure-assisted diffusion experiments at 1773 K

Impact of High Porosity on Thermal Transport in UO_2 Nuclear Fuel

Calculation of the Effective Thermal Conductivity of Porous Polycrystalline U-10Mo Alloy Based on Phase-Field Simulation

Synchrotron Micro-Computed Tomography Analysis of Neutron-Irradiated U-Mo Fuel

High Phonon Scattering Rates Suppress Thermal Conductivity in Hyperstoichiometric Uranium Dioxide

Transient thermal shock behavior of W–Zr/Sc2O3 composites prepared via spark plasma sintering

ANALYSIS OF UO2-BEO FUEL PERFORMANCE DURING NORMAL CONDITIONS AND RIA

Contributions to the mechanistic understanding of the microstructural evolution in irradiated U-Mo dispersion fuel

Achieving High-Thermal-conductivity Brazed Joint Between Carbon-Based Composites and Mo-Cu Alloys by Increasing the Heat Transfer Area

Interface driven energy filtering of thermoelectric power in spark plasma sintered Bi(2)Te(2.7)Se(0.3) nanoplatelet composites.

Microstructure and mechanical properties of Mo–Cu–Zr composites fabricated via microwave sintering

Microstructure and thermal and electric conductivities of high dense Mo/Cu composites