Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

Optimizing coverage of palladium nanoparticles for a highly sensitive hydrogen gas sensor based on nanogaps via spray-deposition

Single‐Crystal Pd and Its Alloy Nanowires for Plasmon Propagation and Highly Sensitive Hydrogen Detection

A Reliable and Fast Hydrogen Gas Leakage Detector Based on Irreversible Cracking of Decorated Palladium Nanolayer Upon Aligned Polymer Fibers

An easy-fabricated hydrogen gas sensor based on palladium-decorated polyurethane nanofibers

Palladium nanosheets bunches for stable and high-concentration hydrogen sensing at room temperature

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Study of a palladium nanoparticle/ In-Zn-O thin film-based hydrogen gas sensor

High Response and ppb-Level Detection toward Hydrogen Sensing by Palladium-Doped α-Fe2O3 Nanotubes

Hydrogen detecting characteristics of a palladium nanoparticle/indium gallium oxide based sensor

Theory-guided design of Pd/C nanocomposite for H2 sensing at room-temperature

Micro Hydrogen Sensor Based on Pd-Ag Nanofilm

Kinetics‐Driven Dual Hydrogen Spillover Effects for Ultrasensitive Hydrogen Sensing

Large-Area Ordered Palladium Nanostructures by Colloidal Lithography for Hydrogen Sensing

High Response and ppb-Level Detection toward Hydrogen Sensing by Palladium-Doped α-Fe 2 O 3 Nanotubes

Nitrogen-doped carbon microfibers decorated with palladium and palladium oxide nanoparticles for high-concentration hydrogen sensing

In-situ synthesis of needle-like PdO-decorated NiO thin films on Al2O3 substrates for high-performance H2 sensors

Study of a New Hydrogen Sensor Based on the Synthesis of a Sputtered In–Sn–Zn-O Thin Film and Evaporated Palladium Nanoparticles

Optimizing Hydrogen Sensing Behavior by Controlling the Coverage in Pd Nanoparticle Films

Study of a New Hydrogen Gas Sensor Synthesized With a Sputtered Cerium Oxide Thin Film and Evaporated Palladium Nanoparticles

Dense palladium nanoparticle arrays with controlled coverage for fast hydrogen sensors

Highly Sensitive Detection of Hydrogen Gas Using Nanoporous Composites of Halloysite Nanotubes and Palladium