Abstract:Coating a polymeric membrane for gas separation is a feasible approach to fabricate gas sensors with selectivity. In this study, poly(methyl methacrylate)-(PMMA-)membrane-coated palladium (Pd) nanoparticle (NP) films were fabricated for high-performance hydrogen (H2) gas sensing by carrying out gas-phase cluster deposition and PMMA spin coating. No changes were induced by the PMMA spin coating in the electrical transport and H2-sensing mechanisms of the Pd NP films. Measurements of H2 sensing demonstrated that the devices were capable of detecting H2 gas within the concentration range 0-10% at room temperature and showed high selectivity to H2 due to the filtration effect of the PMMA membrane layer. Despite the presence of the PMMA matrix, the lower detection limit of the sensor is less than 50 ppm. A series of PMMA membrane layers with different thicknesses were spin coated onto the surface of Pd NP films for the selective filtration of H2. It was found that the device sensing kinetics were strongly affected by the thickness of the PMMA layer, with the devices with thicker PMMA membrane layers showing a slower response to H2 gas. Three mechanisms slowing down the sensing kinetics of the devices were demonstrated to be present: diffusion of H2 gas in the PMMA matrix, nucleation and growth of the β phase in the α phase matrix of Pd hydride, and stress relaxation at the interface between Pd NPs and the PMMA matrix. The retardation effect caused by these three mechanisms on the sensing kinetics relied on the phase region of Pd hydride during the sensing reaction. Two simple strategies, minimizing the thickness of the PMMA membrane layer and reducing the size of the Pd NPs, were proposed to compensate for retardation of the sensing response.

An easy-fabricated hydrogen gas sensor based on palladium-decorated polyurethane nanofibers

A Reliable and Fast Hydrogen Gas Leakage Detector Based on Irreversible Cracking of Decorated Palladium Nanolayer Upon Aligned Polymer Fibers

Micro Hydrogen Sensor Based on Pd-Ag Nanofilm

Hydrogen detecting characteristics of a palladium nanoparticle/indium gallium oxide based sensor

Flexible and Highly Sensitive Hydrogen Sensor Based on Organic Nanofibers Decorated by Pd Nanoparticles

Study of a New Hydrogen Gas Sensor Synthesized With a Sputtered Cerium Oxide Thin Film and Evaporated Palladium Nanoparticles

Study of a palladium nanoparticle/ In-Zn-O thin film-based hydrogen gas sensor

Metal-polymer hybrid chemiresistive sensor for low concentration fast hydrogen detection

Study of a New Hydrogen Sensor Based on the Synthesis of a Sputtered In–Sn–Zn-O Thin Film and Evaporated Palladium Nanoparticles

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

Dense palladium nanoparticle arrays with controlled coverage for fast hydrogen sensors

Optimizing coverage of palladium nanoparticles for a highly sensitive hydrogen gas sensor based on nanogaps via spray-deposition

Flexible fiber-shaped hydrogen gas sensor via coupling palladium with conductive polymer gel fiber

Ultrahigh sensitivity of hydrogen detection with a perforated Pd film on a miniature fiber tip

Nanoparticle-functionalized microsensors for room-temperature hydrogen detection

Fabrication and Ammonia Gas Sensing of Palladium/polypyrrole Nanocomposite

The distinguished hydrogen sensibility by selecting diameters of single-walled carbon nanotubes and adding sensitive materials

Paper-Based Hydrogen Sensors Using Ultrathin Palladium Nanowires

Response Characteristics of Hydrogen Sensors Based on PMMA-Membrane-Coated Palladium Nanoparticle Films.

Experimental Research of Optical Fiber Hydrogen Gas Sensing System Based on Palladium-Silver Alloy

Ultrasensitive and Wide-Range Flexible Hydrogen Sensor Based on Pd Nanoparticles Decorated Ultrathin SnO<sub>2</sub> Film