Abstract:Fouling is one of the most significant problems for internally enhanced tubes installed in the shell and tube condensers. Due to the lack of long-term test data, current fouling models are developed based on accelerated particulate fouling tests that have the low precision and hence are inapplicable for predicting combined fouling in most practical cooling tower systems. In addition, the constant values of fouling resistance (factor) recommended by the Air-Conditioning, Heating, and Refrigeration Institute (AHRI) are extremely limited under different operating conditions. To overcome these challenges, this research developed and validated two fouling prediction models based on experimental long-term tests. One of the models was in the form of a ratio of asymptotic fouling resistance of the enhanced tube to that of the plain tube (<math>Rf∗/Rf,p∗</math>), and the other one was in the form of the asymptotic fouling resistance of the directly enhanced tube (<math>Rf∗</math>). Both models considered water quality, water velocity, and the tube geometries as the variables with the acceptable accuracy for prediction. 1) For the water quality, the parameter of valid concentration (<math>Ccom</math>) of cooling water was defined in this study, which reflected the potential amount of valid components to form the fouling. 2) For the water velocity, its impacts on the two critical parameters of the fouling process: sticking probability (<math>P</math>) and deposit bond strength (<math>ξ</math>) were investigated using experimental studies. Test results showed that in enhanced tubes with the increased water velocity the sticking probability (<math>P</math>) decreased continuously while the deposit bond strength (ξ) initially increased, and then, decreased. 3) For the tube geometries, by taking the parameters of tube geometries as variables the multi-variable correlations of the sticking probability (<math>P</math>) and deposit bond strength (<math>ξ</math>) were developed. From the results the generalized fouling prediction model as a ratio of asymptotic fouling resistance (<math>Rf∗/Rf,p∗</math>) was recommended for the application in HVAC&R industry due to its suitability and accuracy in practical project applications.

Development of a heat transfer model for the film boiling regime in a fouling layer

An Improved Modeling Method of Water-side Fouling in Enhanced Tubes of Condensers in Application of Cooling Water Tower

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

Development of a new semi-mechanistic wall boiling heat transfer model for CFD methodology focusing on macroscopic parameters

Validation and analyses of RANS CFD models for turbulent heat transfer of hydrocarbon fuels at supercritical pressures

A coupled combustion and hydrodynamic model for the prediction of waterwall tube overheating of supercritical boiler

Integrated Numerical Model for Ultra/Supercritical CFB Boilers

A Critical Heat Flux Model for Saturated Flow Boiling on the Downward Curved Heated Surface

Effect of Circumferential Flow Non-uniformity on the Temperature Distribution of Membrane Water Wall in Supercritical Boilers and Simplified Calculation Methods

Two-dimensional numerical model for predicting fouling shape growth based on immersed boundary method and lattice Boltzmann method

Heat Flux Distribution on Circulating Fluidized Bed Boiler Water Wall

A MODEL FOR PREDICTING HEAT TRANSFER PROCESS WITH COAL ASH DEPOSITION IN UTILITY BOILERS

Optimization of structural parameters of an inner preheating transpiring-wall SCWO reactor

A generalized prediction model of waterside fouling for internally enhanced tubes in shell and tube condensers

Development of mechanistic model for CHF based on boiling crisis process

Experimental Study of the Fouling Characteristics in a Pilot-Scale Facility: Influence of the Fouling Surface

Performance assessment of turbulence models in CFX for predicting heat transfer of supercritical water

Theoretical model for subcooled upward flow boiling heat transfer and critical heat flux for an inclined downward heated surface

Soot﹣blowing optimization of boiler heating surface based on thermal performance mechanistic model and fuzzy comprehensive evaluation

Numerical Investigation of Heat Transfer to Supercritical Pressure Water in Vertical Tube with Non-Uniform Heating Form

Hybrid high-temperature fouling and erosion characteristics of gas-particle flow around heating tube via CFD-DEM