Abstract:In vessel retention (IVR) is one of the key severe accident mitigation strategies to maintain reactor pressure vessel (RPV) integrity. IVR designs utilize the reactor pressure vessel lower head to contain molten fuel and rely on external reactor vessel cooling (ERVC) to remove decay heat. The capacity of ERVC is limited by the critical heat flux (CHF) of flow boiling on the outside of the reactor vessel surface. Therefore, the determination of critical heat flux (CHF) is crucial to predict whether the adoption of IVR would be successful in mitigating severe accidents. In 1999, Celeta et.al proposed a superheated layer vapor replenishment model. In this model they postulated that CHF would occur when the superheated layer was occupied by the vapor blanket coming into contact with the heated wall and they successfully predicted the critical heat flux in subcooled water flow boiling under high mass flux, high liquid subcooling and low/medium pressure conditions. To evaluate the practicability of this model in predicting CHF under IVR conditions, CHF experiments were performed under natural circulation conditions on the experiment facility "Test of External Vessel Surface with Enhanced Cooling" (TESEC). Experiments are conducted in a 30 mm wide, 61mm high rectangular flow channel with a 200 mm long heated surface along the flow direction. Two quartz windows are installed at the sidewalls of the flow channel for visualization. In order to simulate various positions of the reactor lower head, experiments at different inclination angles of the test section were conducted. The high speed visualization data at CHF point at various inclination angles were processed and analyzed by a MATLAB code developed by the author. The vapor blanket thickness at various inclination angles was measured from the visualization data and was also predicted by the Celeta model. By using geometry data from high speed images, CHF values were calculated by Celeta model and compared with the experimental results at various inclination angles. Limitations of the Celeta model in adaptation of predicting CHF under IVR conditions were further discussed.

A Critical Heat Flux Model for Saturated Flow Boiling on the Downward Curved Heated Surface

Theoretical model for subcooled upward flow boiling heat transfer and critical heat flux for an inclined downward heated surface

Prediction of Critical Heat Flux for Subcooled Flow Boiling in Annulus and Transient Surface Temperature Change at CHF

The Effects of Surface Orientation, Heater Size, Wettability, and Subcooling on the Critical Heat Flux Enhancement in Pool Boiling

A CHF Correlation and Flow Pattern Observation on a Downward-Facing Boiling Surface

Experimental investigation and a mechanical model of critical heat flux in a narrow rectangular channel

Prediction Of subcooled water flow boiling critical heat flux (CHF) at low pressure

Evaluation of Passive Circulation Flow Characteristics and Chf under In-Vessel Retention

Separate factors’ effects on CHF for flow boiling in an inclined rectangular channel under low mass flux

Observing Investigation of Boiling Characteristics Around CHF for the Downward Facing Heating Surface

CHF experiments and prediction model under subcooling flow boiling condition in passive IVR-ERVC system

Investigation of Bubble Interaction in a Temporal and Spatial Heat Flux Partitioning Model for Subcooled Flow Boiling

A Theoretical Model to Predict Pool Boiling CHF Incorporating Effects of Contact Angle and Orientation

Numerical investigation of critical heat flux during subcooled flow boiling in a vertical rectangular Mini-channel

Critical heat flux for downward-facing saturated pool boiling on pin fin surfaces

Machine Learning Prediction of Critical Heat Flux on Downward Facing Surfaces

Augmentation of Flow Boiling Critical Heat Flux along Microchanneled Surfaces

Development of mechanistic model for CHF based on boiling crisis process

Investigation of flow boiling critical heat flux and heat transfer within a horizontally oriented channel with one-sided heating at three levels of subcooled inlet

Heat Transfer Characteristics and Chf Prediction in Nanofluid Boiling

Experimental Study on the Chf Characteristics with Different Coolant Injection Conditions and Degassing Effects on A Downward-Facing Plane