Abstract:In vessel retention (IVR) is one of the key severe accident mitigation strategies to maintain reactor pressure vessel (RPV) integrity. IVR designs utilize the reactor pressure vessel lower head to contain molten fuel and rely on external reactor vessel cooling (ERVC) to remove decay heat. The capacity of ERVC is limited by the critical heat flux (CHF) of flow boiling on the outside of the reactor vessel surface. Therefore, the determination of critical heat flux (CHF) is crucial to predict whether the adoption of IVR would be successful in mitigating severe accidents. In 1999, Celeta et.al proposed a superheated layer vapor replenishment model. In this model they postulated that CHF would occur when the superheated layer was occupied by the vapor blanket coming into contact with the heated wall and they successfully predicted the critical heat flux in subcooled water flow boiling under high mass flux, high liquid subcooling and low/medium pressure conditions. To evaluate the practicability of this model in predicting CHF under IVR conditions, CHF experiments were performed under natural circulation conditions on the experiment facility "Test of External Vessel Surface with Enhanced Cooling" (TESEC). Experiments are conducted in a 30 mm wide, 61mm high rectangular flow channel with a 200 mm long heated surface along the flow direction. Two quartz windows are installed at the sidewalls of the flow channel for visualization. In order to simulate various positions of the reactor lower head, experiments at different inclination angles of the test section were conducted. The high speed visualization data at CHF point at various inclination angles were processed and analyzed by a MATLAB code developed by the author. The vapor blanket thickness at various inclination angles was measured from the visualization data and was also predicted by the Celeta model. By using geometry data from high speed images, CHF values were calculated by Celeta model and compared with the experimental results at various inclination angles. Limitations of the Celeta model in adaptation of predicting CHF under IVR conditions were further discussed.

Evaluation of Passive Circulation Flow Characteristics and Chf under In-Vessel Retention

A Critical Heat Flux Model for Saturated Flow Boiling on the Downward Curved Heated Surface

Prediction Of subcooled water flow boiling critical heat flux (CHF) at low pressure

Numerical study on the thermal hydraulic characteristics of ERVC system

CFD study on flow-boiling characteristics and predicting critical heat flux under natural circulation conditions of IVR-ERVC

ICONE23-1360 A NEW DETERMINATION APPROACH ON CRITICAL HEAT FLUX WITH INVERSE HEAT CONDUCTION PROBLEM

CHF experiments and prediction model under subcooling flow boiling condition in passive IVR-ERVC system

Prediction of Flow and Temperature Distributions in a High Flux Research Reactor Using the Porous Media Approach

Analysis of Natural Circulation Flow Characteristics under External Vessel Cooling of In Vessel Retention

A CHF Correlation and Flow Pattern Observation on a Downward-Facing Boiling Surface

Prediction of Critical Heat Flux for Subcooled Flow Boiling in Annulus and Transient Surface Temperature Change at CHF

CFD Investigating Flow and Heat Transfer Characteristics in a Natural Circulation Loop

Flow boiling experiments for CHF evaluation under downward-facing heating including flow visualization: Effects of pressure, orientation, mass flux, and local quality

Numerical Investigation on the Thermal-Hydraulic Characteristics near a Corroded Lower Head of the Reactor Vessel During IVR-ERVC

Experimental investigation and a mechanical model of critical heat flux in a narrow rectangular channel

Design and Evaluation of Mitigation Measures for Tsinghua High Flux Reactor Loss-of-Coolant Accidents

CFD study of two-phase cross flow and heat transfer in sub-channels of pressurized water reactor fuel assemblies

Preliminary Investigation of THFR Passive Residual Heat Removal System

Modeling Strategies to Compute Natural Circulation Using Cfd in A Vhtr after A Lofa

Theoretical model for subcooled upward flow boiling heat transfer and critical heat flux for an inclined downward heated surface

Experimental Study on CHF Using a Full Scale 2-D Curved Test Section with Additives and SA508 Heater for IVR-ERVC Strategy