Abstract:A nuclear power reactor's primary use is to generate thermal energy, which in turn produces electricity. The primary heat source is a nuclear fission event occurring inside the fuel rod. The convection heat is transmitted through the coolant by the heat energy generated at the fuel rod wall boundary. Better heat transfer is produced in the flow area by turbulence and irregularity. As a result, turbulent flow heat transfer may present a significant challenge when predicting and assessing the thermal performance of nuclear power reactors. Computational techniques in convective heat transfer have become indispensable for solving challenging issues in the fields of science and engineering thanks to the development of current sophisticated numerical methods and high-performance computer hardware. The development of novel computational techniques and models for complicated transport and multi-physical phenomena is constantly in demand throughout applicable disciplines. This chapter's objective is to provide some recent developments in computational techniques for convective heat transfer, taking into account research interests in the community of mass and heat transfer, and to showcase relevant applications in nuclear power plant engineering domains including future directions. This study describes the most recent advancements in nuclear reactor convective heat transfer research utilizing the computational fluid dynamics (CFD) method, particularly at Ansys Fluent. This work examines the convective heat transfer and fluid dynamics fluid dynamics for turbulent flows across three rod bundle sub-channels that are typical of those employed in the PWR-based VVER type reactor. In this paper, CFD analysis is carried out using the software tool Ansys Fluent. Temperature distribution profile, velocity profile, pressure drop, and turbulence properties were investigated in this study. Boundary conditions i.e. temperature, velocity, pressure, heat flux, and heat generation rate were applied in the sub-channel domain. The main obstacles and bright spots for the CFD methods in nuclear reactor engineering are discussed, which helps to further its further uses. We intend to research a full-length fuel bundle model for VVER-1200 in the future to gather specific fluid characteristic data and use the findings to analyze safety and operate nuclear power facilities in Bangladesh. This paper presents a thorough analysis of the sub-channel thermal hydraulic codes used in nuclear reactor core analysis. This review discusses several facets of previous experimental, analytical, and computational work on rod bundles and identifies potential future directions based on those earlier studies.

CFD study of two-phase cross flow and heat transfer in sub-channels of pressurized water reactor fuel assemblies

The single-phase swirling flow simulation in a heat exchange channel with coolants counterflow at the operation parameters of PWR

Recent Advances in Computational Convective Heat Transfer Study in a Sub-Channel for Nuclear Power Reactor and Future Directions

Numerical investigation on critical heat flux for 5 × 5 fuel assemblies with a wide range of working conditions

Design of thermal hydraulic experiment facility in fuel transfer tube with CFD method

Flow boiling heat transfer and pressure fluctuation characteristics in a divergent channel with inclined downward-facing heater

Subchannel Analysis of Critical Heat Flux in Radially Non-Uniform Heated Rod Assembly at Low Flow Rate

A Review of CFD Advancements Toward Thermal-Hydraulic Analysis of Prototypical Flow Conditions in PWR Subchannels

Evaluation of Passive Circulation Flow Characteristics and Chf under In-Vessel Retention

Investigation on Two-Phase Flow Stability in a Natural Circulation System / Untersuchung Der Stabilität Einer Zweiphasenströmung in Einem System Mit Naturumlauf

Numerical Simulation and Investigation on Natural Circulation Cooling Transient Process for Spent Fuel Assembly in Sodium-cooled Fast Reactor

CFD Investigating Flow and Heat Transfer Characteristics in a Natural Circulation Loop

Multiphase CFD-based critical heat flux predictions for single-element heaters at CANDU reactor conditions

Thermal-Hydraulic Analysis For Experimental Device Of Supercritical Water Reactor-Fuel Qualification Test

Study on the Prediction of DNB-Type Critical Heat Flux in Rod Bundle Under Motion Conditions

Heat Transfer Calculation on Plate-Type Fuel Assembly of High Flux Research Reactor

Advanced CFD modeling of rod bundle channels with integrated porous media and momentum source schemes

Numerical Simulation and Analysis on Thermal-hydraulic Behavior of Fuel Assembly for Sodium-cooled Fast Reactor

CFD analysis for full vessel upper plenum in Maanshan Nuclear Power Plant

OpenFOAM CFD simulation of critical heat flux in vertical pipe under typically PWR conditions

Subchannel Analysis of Radial Uniform and Non-Uniform Heating Assembly Under Low Mass Flow Rate Conditions