Abstract:In most industrial sectors, large coal-fired boilers are a source of carbon and pollutant emissions, so it is important to carry out combustion adjustment and optimize energy-saving operation of coal-fired boilers. Traditional combustion adjustment relies on human intervention, but manual adjustment is difficult to achieve synergistic optimization of NOx and thermal efficiency at the same time, so there is a large adjustment space for boiler combustion optimization. Artificial intelligence technology can explore the potential of combustion optimization from boiler operation data. Currently, the boiler combustion optimization method based on supervised learning modeling and optimization algorithms has good optimization effect and high application value. At present, there are problems such as the combination of dynamic model and optimization algorithm is difficult and the optimization time is long, etc. This paper adopts feature classification and multi-model coupling to build a static-dynamic composite prediction model of boiler performance indicators, dynamic prediction model of boiler thermal efficiency and nitrogen oxides (NOx) is established by using long short-term memory (LSTM) and one-dimensional convolutional neural network (1D_CNN). The model is categorized into static and dynamic models based on the input features, and the dynamic model is coupled with BP neural network to establish a static-dynamic composite prediction model and further couples the proximal policy optimization (PPO) reinforcement learning algorithm to establish a boiler in-place optimization strategy. Through the experimental validation of 5619 test cases, the strategy successfully achieves 63.5 % co-optimization of NOx and thermal efficiency, with thermal efficiency increase ranging from 0-0.61 % and NOx reduction ranging from 0-65 mg/m3. Meanwhile, comparing the optimization effect of the PPO algorithm with that of the genetic algorithm (GA) shows that the PPO strategy has a more significant effect on NOx reduction while keeping the thermal efficiency optimized. Moreover, the online decision-making speed of the PPO strategy is much higher than that of the GA, with an average time consumption of only 0.015 s, while the GA requires about 3 min for a single optimization, which indicates that the combustion optimization strategy of the PPO algorithm coupled with the composite prediction model has a significant advantage in realizing high-efficiency and accurate optimization.

Soot﹣blowing optimization of boiler heating surface based on thermal performance mechanistic model and fuzzy comprehensive evaluation

Operation Optimization of Circulating Fluidized Bed Boiler for Energy Saving

Combustion Optimization Study of Pulverized Coal Boiler Based on Proximal Policy Optimization Algorithm

On-line monitoring of fouling on convective heating surface in utility boilers

Improvement of slagging monitoring and soot-blowing of waterwall in a 650MWe coal-fired utility boiler

Online Ash Fouling Prediction for Boiler Heating Surfaces based on Wavelet Analysis and Support Vector Regression

OPTIMIZED SOOTBLOWING MODEL FOR BOILERS BASED ON TEMPERATURE FIELD MEASUREMENT AND THERMODYNAMIC CALCULATION

REASONABLY WORKING OUT SOOTBLOWING SCHEME OF UTILITY BOILERS

The integrated analysis of economy and safety on SOFA running mode of a 600MWe boiler

Coal-fired power plant boiler combustion process modeling based on support vector machine and load data division

Performance Online Prediction of Supercritical Boilers Based on Mechanism and Data-driven Model

STUDY ON NUMERICAL SIMULATION OF DECREASING NOx EMISSION FROM COAL-FIRED BOILERS BASED ON BFA AND OFA

A new on-line combustion optimization approach for ultra-supercritical coal-fired boiler to improve boiler efficiency, reduce NOx emission and enhance operating safety

Optimization of Circulating Fluidized Bed Boiler Combustion Key Control Parameters Based on Machine Learning

An Effective Strategy for Monitoring Slagging Location and Severity on the Waterwall Surface in Operation Coal-Fired Boilers

A Data-Driven Approach for the Ultra-Supercritical Boiler Combustion Optimization Considering Ambient Temperature Variation: A Case Study in China

A new online optimization method for boiler combustion system based on the data-driven technique and the case-based reasoning principle

Multi-objective optimization of fly ash carbon content and NO_x emission concentration for 300 MW pulverized-coal boiler

A Real-Time Calculation Method to Improve Boiler Safety in Deep Peak Shaving Cases

Mathematical Modeling for Analysis of Boiler Performance on Influence of Excess Air Coefficient- Determination of Optimum Excess Air Coefficient

Development and Application of the On-line Boiler Combustion Optimization Technology