Abstract:In most industrial sectors, large coal-fired boilers are a source of carbon and pollutant emissions, so it is important to carry out combustion adjustment and optimize energy-saving operation of coal-fired boilers. Traditional combustion adjustment relies on human intervention, but manual adjustment is difficult to achieve synergistic optimization of NOx and thermal efficiency at the same time, so there is a large adjustment space for boiler combustion optimization. Artificial intelligence technology can explore the potential of combustion optimization from boiler operation data. Currently, the boiler combustion optimization method based on supervised learning modeling and optimization algorithms has good optimization effect and high application value. At present, there are problems such as the combination of dynamic model and optimization algorithm is difficult and the optimization time is long, etc. This paper adopts feature classification and multi-model coupling to build a static-dynamic composite prediction model of boiler performance indicators, dynamic prediction model of boiler thermal efficiency and nitrogen oxides (NOx) is established by using long short-term memory (LSTM) and one-dimensional convolutional neural network (1D_CNN). The model is categorized into static and dynamic models based on the input features, and the dynamic model is coupled with BP neural network to establish a static-dynamic composite prediction model and further couples the proximal policy optimization (PPO) reinforcement learning algorithm to establish a boiler in-place optimization strategy. Through the experimental validation of 5619 test cases, the strategy successfully achieves 63.5 % co-optimization of NOx and thermal efficiency, with thermal efficiency increase ranging from 0-0.61 % and NOx reduction ranging from 0-65 mg/m3. Meanwhile, comparing the optimization effect of the PPO algorithm with that of the genetic algorithm (GA) shows that the PPO strategy has a more significant effect on NOx reduction while keeping the thermal efficiency optimized. Moreover, the online decision-making speed of the PPO strategy is much higher than that of the GA, with an average time consumption of only 0.015 s, while the GA requires about 3 min for a single optimization, which indicates that the combustion optimization strategy of the PPO algorithm coupled with the composite prediction model has a significant advantage in realizing high-efficiency and accurate optimization.

Multi-objective optimization of fly ash carbon content and NO_x emission concentration for 300 MW pulverized-coal boiler

Combustion Optimization Study of Pulverized Coal Boiler Based on Proximal Policy Optimization Algorithm

NOx Prediction Model for Multi-coal Admixing Combustion in Boiler

Numerical Study of Operation Parameters on Pulverized Coal Ignition and Unburned Carbon in Fly Ash for a Boiler

The Investigation of Carbon Content in Fly Ash for a BP Neural Network-based Pulverized Coal-fired Boiler

Coal-fired power plant boiler combustion process modeling based on support vector machine and load data division

Optimization of Circulating Fluidized Bed Boiler Combustion Key Control Parameters Based on Machine Learning

Computational intelligence approach for NOx emissions minimization in a coal-fired utility boiler

Study on Optimization of Soot Blowing Based on Monitoring Model of Coal-Fired Power Station Soot Accumulation

Multi-objective Optimization of the Coal Combustion Performance with Artificial Neural Networks and Genetic Algorithms

NOx emission reduction of coal‐fired power plants through data‐driven model and particle swarm optimization

Improvement of slagging monitoring and soot-blowing of waterwall in a 650MWe coal-fired utility boiler

Combustion optimization of ultra supercritical boiler based on artificial intelligence

[Predicting Low NOx Combustion Property of a Coal-Fired Boiler].

Modeling and Coordinative Optimization of Nox Emission and Efficiency of Utility Boilers with Neural Network

Combustion Optimization for Utility Boiler Based on Least Square-support Vector Machine

A Data-Driven Approach for the Ultra-Supercritical Boiler Combustion Optimization Considering Ambient Temperature Variation: A Case Study in China

The Analysis of the Unburned Carbon in Fly Ash for Tangentially Pulverized Coal-Fired Boiler Based on Factor Analysis Method

Ash Fouling Monitoring and Key Variables Analysis for Coal Fired Power Plant Boiler

A new on-line combustion optimization approach for ultra-supercritical coal-fired boiler to improve boiler efficiency, reduce NOx emission and enhance operating safety

An Optimization Study on Soot-Blowing of Air Preheaters in Coal-Fired Power Plant Boilers