Abstract:In recent years, oxy-fuel combustion in coal-fired plants has become one of the most promising technologies for carbon capture and storage (CCS). Compared with air-fired combustion, high concentrations of CO2 and H2O in the flue gas cause a remarkable change in the pulverized coal combustion and heat transfer characteristics in furnace. In this study, improved models for the gas radiative properties and chemical reaction mechanisms were incorporated into the computational fluid dynamics (CFD) code to simulate a 200 MWe tangentially fired utility boiler, which is expected to operate at full load under both conventional air-fired and oxy-fuel combustion. Different flue gas recycle patterns: dry recycle and wet recycle, were also investigated. The results indicate that, stable combustion is achieved by a compatible burner design in both air-fired and oxy-fuel combustion. In the oxy-fuel combustion, the flue gas peak temperature and wall heat flux decrease and high CO concentration appears in the burner region, resulted from higher heat capacity of CO2 and chemical effect of CO2 (Liu et al., 2003, Glarborg and Bentzen, 2008). Based on the comparison of the wet recycle and dry recycle, it shows the wet recycle has more advantages than dry recycle. This study indicates a slight increase in total heat transfer, when the oxygen concentration in oxidant increases from 23% to 29%, consistent with the results of Vattenfall and Callide pilot scale oxy-combustion plant. Thus, compared with air-fired combustion, the full load of a boiler may decrease by 5-10% under oxy-fuel combustion. (C) 2014 Elsevier Ltd. All rights reserved.

OPTIMIZED SOOTBLOWING MODEL FOR BOILERS BASED ON TEMPERATURE FIELD MEASUREMENT AND THERMODYNAMIC CALCULATION

DEVELOPMENT OF OBJECT-ORIENTED UNIVERSAL SOLFTWARE FOR THERMODYNAWIC CALCULATION OF BOILERS

Soot﹣blowing optimization of boiler heating surface based on thermal performance mechanistic model and fuzzy comprehensive evaluation

Development and Applications of the Thermal Calculation System for Universal Industrial Boilers

REASONABLY WORKING OUT SOOTBLOWING SCHEME OF UTILITY BOILERS

Numerical Investigation on Oxy-Combustion Characteristics of a 200 MWe Tangentially Fired Boiler

Mathematical modeling of combustion in a grate-fired boiler burning straw and effect of operating conditions under air- and oxygen-enriched atmospheres

STATUS QUO OF RESEARCH AND APPLICATION FOR SOOTBLOWING OPTIMIZATION ON UTILIYTY BOILERS

STUDY ON PREDICTION MODEL FOR TEMPERATURE OF FLUE GAS EXHAUSTED FROM UTILITY BOILERS BASED ON PROPERTIES OF FUEL COAL

On-line monitoring of fouling on convective heating surface in utility boilers

Improvement of slagging monitoring and soot-blowing of waterwall in a 650MWe coal-fired utility boiler

Coal-fired power plant boiler combustion process modeling based on support vector machine and load data division

ON-LINE FORECASTING MODEL OF UNCOMPLETED BURNED CARBON ANALYSED BY FURNACE TEMPERATURE PROFILE AND THERMAL BALANCE

APPLICATION OF COMBUSTION DIAGNOSIS AND TEMPERATURE DISTRIBUTION MEASUREMENT SYSTEM BASED ON IMAGE PROCESSING TECHNIQUE ON 300MW UTILITY BOILER

One-dimensional Mathematical Model and Relevant Simulation for Pulverized Coal Combustion in a Boiler Furnace

Combustion Optimization for Utility Boiler Based on Least Square-support Vector Machine

A new online optimization method for boiler combustion system based on the data-driven technique and the case-based reasoning principle

A MODEL AND SIMULATION FOR RADIATIVE HEAT TRANSFER IN A BOILER FURNACE

STUDY ON NUMERICAL SIMULATION OF DECREASING NOx EMISSION FROM COAL-FIRED BOILERS BASED ON BFA AND OFA

Development and Application of the On-line Boiler Combustion Optimization Technology

Modeling and Prediction of Biomass Direct Fired Circulating Fluidized Bed Boiler Combustion System