Abstract:Zeolites have many uses and are continually developed for catalysis and separations as highly active, selective and thermally stable materials with microporous framework structures of various topologies. Among approximately 250 known frameworks about 20, but possibly all eventually, produced 2D forms with layers of thickness up to a few nanometers. Recently, layered forms of the zeolite MWW and a ferrierite-related one have been exfoliated directly by a soft-chemical treatment into solutions of unilamellar nanosheets. They enable the synthesis of layer-based hierarchical and nanocomposite materials with diverse compositions that are unfeasible with solid 3D and 2D forms. The efficiency and yield of zeolite exfoliation can be inhibited by intergrowth so each topology presents a separate challenge. The MFI zeolite can provide particular benefits as one of the most active and versatile frameworks. It has permeable layers due to perpendicular channels and has been used as a membrane. This article describes exfoliation of the layered MFI produced by the bifunctional template developed by Ryoo et al. It affords unilamellar MFI nanosheets in solution with a uniform hydrated thickness of 3.6 nm confirmed by AFM, X-ray diffraction and TEM. The nanosheets can be reassembled top-down into self-standing b -oriented discs or films, proven by X-ray powder diffraction. They preserve high acid site concentration and porosity. The basal spacing contracts from 3.6 nm to 2.8 nm upon calcination. Oriented MFI films were also formed by the evaporation/calcination of nanosheet solutions and surfactant composites enabling simple fabrication on various substrates for application in catalysis and separations.

Twin-free, directly synthesized MFI nanosheets with improved thickness uniformity and their use in membrane fabrication

Microstructure Manipulation of MFI-type Zeolite Membranes on Hollow Fibers for Ethanol–water Separation

Fabrication of B-Oriented MFI Membranes from MFI Nanosheet Layers by Ammonium Sulfate Modifier for the Separation of Butane Isomers

Morphologically Tunable MOF Nanosheets in Mixed Matrix Membranes for CO2 Separation

Fabrication of B-Oriented MFI Zeolite Membranes by a Printing-Transfer Seed Layer Procedure.

Two-Dimensional MFI Zeolite Nanosheets Exfoliated by Surfactant Assisted Solution Process

Fabrication and Application of MFI Zeolite Nanosheets

One-dimensional Intergrowths in Two-Dimensional Zeolite Nanosheets and Their Effect on Ultra-Selective Transport.

Microstructural Manipulation of MFI-type Zeolite Films/membranes: Current Status and Perspectives

Uniform Hierarchical MFI Nanosheets Prepared Via Anisotropic Etching for Solution-Based Sub–100-Nm-thick Oriented MFI Layer Fabrication

Atomic Structure of Self-Pillared, Single-Unit-Cell Sn-MFI Zeolite Nanosheets

Membranes with ZIF-8 regulated MXene nanosheet stacks for efficient molecular sieving

Nanocomposite Mfi-Alumina Hollow Fibre Membranes Prepared Via Pore-Plugging Synthesis: Influence of the Porous Structure of Hollow Fibres on the Gas/Vapour Separation Performance

Exceptionally Fast Separation of Xylene Isomers with Zeolitic Nanotube Array Membranes

Fabrication of MIL-96 nanosheets and relevant c-oriented ultrathin membrane through solvent optimization

Preparation of MFI Zeolite Nanosheets and <i>b</i>-Oriented MFI Zeolite Film

Exfoliating layered zeolite MFI into unilamellar nanosheets in solution as precursors for the synthesis of hierarchical nanocomposites and oriented films

Mixed Matrix Membranes Based on MFI Zeolite Nanosheets with Tunable Thickness for CO2/CH4 and H2/CH4 Separation

The Synthesis of Nanosheets Zeolite and Its Catalytic Application

Twinned Metal–Organic Framework Nanoplates for Hydrocarbon Separation Membranes

Pillared MFI zeolite nanosheets of a single-unit-cell thickness