Abstract:Preparation steps of anion conducting solid polymer electrolyte membrane from ETFE via radiation grafting technique and their applications. Solid polymer electrolyte membranes are considered as the nub of many electrochemical devices. Given the climate crisis and related concerns, the evolution of new membrane materials to support the sustainable systems is inevitable. Building on recent advances with the radiation technique and polymer chemistry, herein, anion exchange membranes (AEMs), ETFE‐g‐1VIm/4VP, were fabricated through graft copolymerization of vinyl heterocyclic monomer binary mixture, such as 1‐vinylimidazole (1‐VIm) and 4‐vinylpyridine (4‐VP) onto ethylene tetrafluoroethylene (ETFE), a main polymer backbone without aryl ether bonds. The grafting reaction was achieved at 60°C and then followed by quaternization as a subsequent step. The effects of various reaction grafting conditions were investigated. The ETFE‐g‐1VIm/4VP AEM were characterized w.r.t the morphological and structural features. The dense surface of the grafted membranes is proved by field emission‐scanning electron microscopy (FE‐SEM) images, which also show that the vinyl entities are clearly distributed in the prepolymer, which may lead to a continuous ion transport channel. AEMs processed from the highest graft yield showed good hydroxide conductivity at 90°C, reaching 16.9 mS/cm due to the presence of more transport sites. The same membrane has a relatively good alkaline stability, which is studied through weight percentage method and FT‐IR. Hence, we assume that the introduction of multi‐cationic moieties, pyridinium and imidazolium, contributes to the performance of anion exchange membranes and makes a perfect balance, especially the hydrophilicity and hydrophobicity. These data highlight the potential of the copolymer as an anion exchange membrane for wide spectra of electrochemical applications. Highlights AEMs based on ETFE‐g‐1VIm/4VP are developed via radiation grafting. The membrane exhibits remarkable alkaline stability. FT‐IR, SEM, and weight percentage methods were used to prove the alkaline stability. The membrane has the potential to be used for different electrochemical applications.

Preparation and characterization of chemically stable polymer electrolyte membranes by radiation-induced graft copolymerization of four monomers into ETFE films

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Grafted polymer electrolyte membrane for direct methanol fuel cells

Preparation of a Novel Proton Exchange Membrane Using Radiation Grafted ETFE Film for Fuel Cell

Synthesis of Fluorinated Polymer Electrolyte Membranes by Radiation Grafting and Atom Transfer Radical Polymerization Techniques

Anion exchange membrane with enhanced alkaline stability through radiation grafting of ETFE for solid polymer electrolytes

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

Radiation-Grafted Polymer Electrolyte Membranes for Water Electrolysis Cells: Evaluation of Key Membrane Properties

Modification of ultrathin polyetheretherketone film for application in direct methanol fuel cells

Study on the mechanism of graft polymerization and sulfonation of proton exchange membranes for fuel cell

Evaluation and Optimization of Polycarbonate Track-Etched (PCTE) Membranes for Direct Methanol Fuel Cells.

Dually Cross-Linked Polymer Electrolyte Membranes for Direct Methanol Fuel Cells

Preparation and DMFC performance of a sulfophenylated poly(arylene ether ketone) polymer electrolyte membrane

Fabrication of Silane-crosslinked Proton Exchange Membranes by Radiation and Evaluation of Fuel Cell Performance

Design of a stable and methanol resistant membrane with cross-linked multilayered polyelectrolyte complexes for direct methanol fuel cells

Preparation of poly(vinyl phosphate-b-styrene) copolymers and its blend with PPO as proton exchange membrane for DMFC applications

Design of Polyphosphazene-Based Graft Copolystyrenes with Alkylsulfonate Branch Chains for Proton Exchange Membranes

Poly(3,4-ethylenedioxythiophene)-modified Nafion Membrane for Direct Methanol Fuel Cells

Novel Proton Exchange Membranes Based on Sulfonated-Phosphonated Poly (P-Phenylene-co-aryl Ether Ketone) Terpolymers with Microblock Structures for Passive Direct Methanol Fuel Cells

Quantitative analysis of proton exchange membrane prepared by radiation-induced grafting on ultra-thin FEP film

Esterification modification and characterization of polyvinyl alcohol anion exchange membrane for direct methanol fuel cell