Abstract:Preparation steps of anion conducting solid polymer electrolyte membrane from ETFE via radiation grafting technique and their applications. Solid polymer electrolyte membranes are considered as the nub of many electrochemical devices. Given the climate crisis and related concerns, the evolution of new membrane materials to support the sustainable systems is inevitable. Building on recent advances with the radiation technique and polymer chemistry, herein, anion exchange membranes (AEMs), ETFE‐g‐1VIm/4VP, were fabricated through graft copolymerization of vinyl heterocyclic monomer binary mixture, such as 1‐vinylimidazole (1‐VIm) and 4‐vinylpyridine (4‐VP) onto ethylene tetrafluoroethylene (ETFE), a main polymer backbone without aryl ether bonds. The grafting reaction was achieved at 60°C and then followed by quaternization as a subsequent step. The effects of various reaction grafting conditions were investigated. The ETFE‐g‐1VIm/4VP AEM were characterized w.r.t the morphological and structural features. The dense surface of the grafted membranes is proved by field emission‐scanning electron microscopy (FE‐SEM) images, which also show that the vinyl entities are clearly distributed in the prepolymer, which may lead to a continuous ion transport channel. AEMs processed from the highest graft yield showed good hydroxide conductivity at 90°C, reaching 16.9 mS/cm due to the presence of more transport sites. The same membrane has a relatively good alkaline stability, which is studied through weight percentage method and FT‐IR. Hence, we assume that the introduction of multi‐cationic moieties, pyridinium and imidazolium, contributes to the performance of anion exchange membranes and makes a perfect balance, especially the hydrophilicity and hydrophobicity. These data highlight the potential of the copolymer as an anion exchange membrane for wide spectra of electrochemical applications. Highlights AEMs based on ETFE‐g‐1VIm/4VP are developed via radiation grafting. The membrane exhibits remarkable alkaline stability. FT‐IR, SEM, and weight percentage methods were used to prove the alkaline stability. The membrane has the potential to be used for different electrochemical applications.

Anion exchange membrane with enhanced alkaline stability through radiation grafting of ETFE for solid polymer electrolytes

Novel Cross-Linked Anion Exchange Membranes with Diamines As Ionic Exchange Functional Groups and Crosslinking Groups

ETFE-grafting ionomers for anion exchange membrane water electrolyzers with a current density of 11.2 A cm −2

Aryl‐Ether‐Free Polyaromatics‐Based Alkaline‐Resistant Anion exchange PTFE Composite Membrane

Polyethylene-based radiation grafted anion-exchange membranes for alkaline fuel cells

A green approach for preparing anion exchange membrane based on cardo polyetherketone powders

Radiation-Grafted Polymer Electrolyte Membranes for Water Electrolysis Cells: Evaluation of Key Membrane Properties

Preparation and characterization of chemically stable polymer electrolyte membranes by radiation-induced graft copolymerization of four monomers into ETFE films

Anion Exchange Membranes Based on Sulfonated Poly(ether ether ketone) Crosslinked Methylpyrrolidinium Functionalized Poly (vinyl benzyl chloride) with High Chemical Stability

Synthesis and properties of a new ether-free poly(bis-alkylpiperidinium) polymer for the anion exchange membrane

Dimensionally and oxidatively stable anion exchange membranes based on bication cross-linked poly(meta-terphenylene alkylene)s

Preparation of a Novel Proton Exchange Membrane Using Radiation Grafted ETFE Film for Fuel Cell

Physically and Chemically Stable Anion Exchange Membranes with Hydrogen-Bond Induced Ion Conducting Channels

A convenient, efficient and green route for preparing anion exchange membranes for potential application in alkaline fuel cells

Polyketone-Based Anion-Exchange Membranes for Alkaline Water Electrolysis

Synthesis of Fluorinated Polymer Electrolyte Membranes by Radiation Grafting and Atom Transfer Radical Polymerization Techniques

Mechanically robust semi-interpenetrating polymer network via thiol-ene chemistry with enhanced conductivity for anion exchange membranes

A novel strategy to construct highly conductive and stabilized anionic channels by fluorocarbon grafted polymers

Investigating the suitability of poly tetraarylphosphonium based anion exchange membranes for electrochemical applications

Branched, Side-Chain Grafted Polyarylpiperidine Anion Exchange Membranes for Fuel Cell Application

High-Performance Anion Exchange Membranes with Para-Type Cations on Electron-Withdrawing C═O Links Free Backbone