Abstract:Preparation steps of anion conducting solid polymer electrolyte membrane from ETFE via radiation grafting technique and their applications. Solid polymer electrolyte membranes are considered as the nub of many electrochemical devices. Given the climate crisis and related concerns, the evolution of new membrane materials to support the sustainable systems is inevitable. Building on recent advances with the radiation technique and polymer chemistry, herein, anion exchange membranes (AEMs), ETFE‐g‐1VIm/4VP, were fabricated through graft copolymerization of vinyl heterocyclic monomer binary mixture, such as 1‐vinylimidazole (1‐VIm) and 4‐vinylpyridine (4‐VP) onto ethylene tetrafluoroethylene (ETFE), a main polymer backbone without aryl ether bonds. The grafting reaction was achieved at 60°C and then followed by quaternization as a subsequent step. The effects of various reaction grafting conditions were investigated. The ETFE‐g‐1VIm/4VP AEM were characterized w.r.t the morphological and structural features. The dense surface of the grafted membranes is proved by field emission‐scanning electron microscopy (FE‐SEM) images, which also show that the vinyl entities are clearly distributed in the prepolymer, which may lead to a continuous ion transport channel. AEMs processed from the highest graft yield showed good hydroxide conductivity at 90°C, reaching 16.9 mS/cm due to the presence of more transport sites. The same membrane has a relatively good alkaline stability, which is studied through weight percentage method and FT‐IR. Hence, we assume that the introduction of multi‐cationic moieties, pyridinium and imidazolium, contributes to the performance of anion exchange membranes and makes a perfect balance, especially the hydrophilicity and hydrophobicity. These data highlight the potential of the copolymer as an anion exchange membrane for wide spectra of electrochemical applications. Highlights AEMs based on ETFE‐g‐1VIm/4VP are developed via radiation grafting. The membrane exhibits remarkable alkaline stability. FT‐IR, SEM, and weight percentage methods were used to prove the alkaline stability. The membrane has the potential to be used for different electrochemical applications.

Preparation of a Novel Proton Exchange Membrane Using Radiation Grafted ETFE Film for Fuel Cell

PVDF-based Polymer Blend Films for Fuel Cell Membranes

Study on the mechanism of graft polymerization and sulfonation of proton exchange membranes for fuel cell

Quantitative analysis of proton exchange membrane prepared by radiation-induced grafting on ultra-thin FEP film

Fabrication of Silane-crosslinked Proton Exchange Membranes by Radiation and Evaluation of Fuel Cell Performance

Preparation and characterization of chemically stable polymer electrolyte membranes by radiation-induced graft copolymerization of four monomers into ETFE films

Anion exchange membrane with enhanced alkaline stability through radiation grafting of ETFE for solid polymer electrolytes

Doped polymethyl methacrylate (PMMA) as proton exchange membrane for microbial fuel cell

Metal-Salt Enhanced Grafting of Vinylpyridine and Vinylimidazole Monomer Combinations in Radiation Grafted Membranes for High-Temperature PEM Fuel Cells

A composite proton exchange membrane with three-dimensionally-reinforced hydrogen bonding network for durable hydrogen fuel cells

A Robust Composite Proton Exchange Membrane of Sulfonated Poly (Fluorenyl Ether Ketone) with an Electrospun Polyimide Mat for Direct Methanol Fuel Cells Application

Polyethylene-based radiation grafted anion-exchange membranes for alkaline fuel cells

Probing the Efficiency of PPMG-Based Composite Electrolytes for Applications of Proton Exchange Membrane Fuel Cell

Novel poly(biphenyl-alkylene) anion exchange membranes with excellent flexibility for fuel cells

Development of polymer electrolyte membrane based on poly(Vinyl Chloride)/graphene oxide modified with zirconium phosphate for fuel cell applications

Proton Exchange Membranes Based on Aryl Epoxy Resin for Fuel Cells Operated at Elevated Temperatures

Novel Proton Exchange Membrane with Long-Range Acid–Base-Pair Proton Transfer Pathways Based on Functionalized Polyethyleneimine

Grafting free radical scavengers onto polyarylethersulfone backbones for superior chemical stability of high temperature polymer membrane electrolytes

A novel anion exchange membrane of three aromatic units copolymer for fuel cells

Development of robust proton exchange membranes using sPVA-Silica composite with different crosslinkers and evaluation of their fuel cell performance

Imidazolium-Quaternized Poly(2,6-Dimethyl-1,4-Phenylene Oxide)/Zeolitic Imidazole Framework-8 Composite Membrane as Polymer Electrolyte for Fuel-Cell Application