Abstract:The growth characteristics of Ta2O5 thin films by atomic layer deposition (ALD) were examined using Ta(NtBu)(NEt2)3 (TBTDET) and Ta(NtBu)(NEt2)2Cp (TBDETCp) as Ta-precursors, where tBu, Et, and Cp represent tert-butyl, ethyl, and cyclopentadienyl groups, respectively, along with water vapor as oxygen source. The grown Ta2O5 films were amorphous with very smooth surface morphology for both the Ta-precursors. The saturated ALD growth rates of Ta2O5 films were 0.77 Å cycle-1 at 250 °C and 0.67 Å cycle-1 at 300 °C using TBTDET and TBDETCp precursors, respectively. The thermal decomposition of the amido ligand (NEt2) limited the ALD process temperature below 275 °C for TBTDET precursor. However, the ALD temperature window could be extended up to 325 °C due to a strong Ta-Cp bond for the TBDETCp precursor. Because of the improved thermal stability of TBDETCp precursor, excellent nonuniformity of ∼2% in 200 mm wafer could be achieved with a step coverage of ∼90% in a deep hole structure (aspect ratio 5:1) which is promising for 3-dimensional architecture to form high density memories. Nonetheless, a rather high concentration (∼7 at. %) of carbon impurities was incorporated into the Ta2O5 film using TBDETCp, which was possibly due to readsorption of dissociated ligands as small organic molecules in the growth of Ta2O5 film by ALD. Despite the presence of high carbon concentration which might be an origin of large leakage current under electric fields, the Ta2O5 film using TBDETCp showed a promising resistive switching performance with an endurance cycle as high as ∼17 500 for resistance switching random access memory application. The optical refractive index of the deposited Ta2O5 films was 2.1-2.2 at 632.8 nm using both the Ta-precursors, and indirect optical band gap was estimated to be ∼4.1 eV for both the cases.

Annealing effects on the optical and electrochemical properties of tantalum pentoxide films

Annealing Temperature Dependent Microstructure and Optical Properties of HfxTi1-xO2 Thin Films

Tuning of Electrical and Optical Properties of Tantalum Doped TiO2 Flims Prepared by Sol-gel Method

Influence of Annealing Temperature on Microstructure and Phase Transformations of Oxide System Bi2O3/TiO2 Formed in Aqueous Solutions

Electrical characterization of Ta2O5 films deposited by laser reactive ablation of metallic Ta

Evidence for structural transition in crystalline tantalum pentoxide films grown by RF magnetron sputtering

Influence of annealing on microstructure and electrochromic properties of WO3 thin film

Pulsed laser deposition of tantalum oxide thin films

Controlling the Electrical Properties of Undoped and Ta-doped TiO2 Polycrystalline Films via Ultra-Fast Annealing Treatments

The Anomalous Annealing Hardening Behaviors in Commercial Pure Tantalum Foil

Influence of Annealing Temperature on the Properties of Titanium Oxide Thin Film

Effect of annealing temperature of titanium dioxide thin films on structural and electrical properties

Effect of Annealing Temperature on Morphology and Electrochromic Performance of Electrodeposited WO3 Thin Films

Effect of Annealing Temperature on F-doped TiO2 Spin Coated Thin Films

Comparison of the Atomic Layer Deposition of Tantalum Oxide Thin Films Using Ta(NtBu)(NEt2)3, Ta(NtBu)(NEt2)2Cp, and H2O

The effect of an annealing process on atomic layer deposited TiO2thin films

Intense Photoluminescence From Amorphous Tantalum Oxide Films

Annealing effects on properties of antimony tin oxide thin films deposited by RF reactive magnetron sputtering

An Investigation of Oxides of Tantalum Produced by Pulsed Laser Ablation and Continuous Wave Laser Heating

Effects of Annealing Temperature on Optical Band Gap of Sol-gel Tungsten Trioxide Films

Effect of Annealing on the Structural, Magnetic, Surface Energy and Optical Properties of Co32Fe30W38 Films Deposited by Direct-Current Magnetron Sputtering