Abstract:Measuring and reconstructing the shape of workpieces have been considered as a fundamental step in both reverse engineering and product quality control. Owing to increasing structural complexity of recent products, measurements from multiple directions are typically required in current scanning techniques. Specifically, the plane structured light can be applied to measure one area of a part at a time, with an additional algorithm required to merge the collected data of each area. Alternatively, the line structured light sensor integrated on CNC machines or CMMs could also realize multi-view measurement. However, the system needs to be repeatedly calibrated at each new direction. This paper presents a flexible scanning method by integrating laser line sensors with articulated arm coordinate measuring machines (AACMM). Since the output of the laser line sensor is 2D raw data in the laser plane, our system model introduces an explicit transformation from the 2D sensor coordinate frame to the 3D base coordinate frame of the AACMM (i.e., the translation and rotation the of the 2D sensor coordinate in the sixth coordinate system of AACMM). To solve the model, the "conjugate pairs" are proposed and identified by measuring a fixed point (e.g., a sphere center). Moreover, a search algorithm is adopted to find the optimal solution, which noticeably boosts the model accuracy. The experimental results show that the error of the system is about 0.2 mm, which is caused by the error of the AACMM, the sensor error and the calibration error. By measuring a complicated part, the proposed system is proved to be flexible and facilitate, with the ability to measure a part expediently from any necessary direction. Furthermore, the proposed calibration method can also be used for robot hand-eye relationship calibration.

Efficient Calibration of a Scanning Probe on CMM

An Efficient Calibration Method for 3D Nonlinear and Nonorthogonal Scanning Probe in Cylindrical CMM

Dynamic Error Modeling and Compensation of a Scanning Probe on CMM

A Robust and Efficient Calibration Method for Spot Laser Probe on CMM

Three-dimensional Scanning Probe Calibration Method

A New Centering Method of the Measuring Probe for Spiral Scanning-Based Surface Profile Measurement Systems

Extrinsic calibration method for 3D scanning system with four coplanar laser profilers

Application of calibrated and reusable probes on a home-made scanning probe microscope platform

A Novel Four-Port Symmetric Probe Calibration Method for On-Wafer S-Parameter Measurement

A simultaneous calibration technique of the extrinsic and turntable for structured-light-sensor-integrated CNC system

Calibration of the laser displacement sensor and integration of on-site scanned points

The Parameters Design and Analysis of Micro-nano CMM Probe

Flexible Scanning Method by Integrating Laser Line Sensors with Articulated Arm Coordinate Measuring Machines

Calibration technology of articulated arm flexible CMM

Pose calibration of line structured light probe based on ball bar target in cylindrical coordinate measuring machines

Effective Improvement of Scanning Resonance Through Dynamic Optimization of the Probe

An Optimized Design of a Scanning Confocal Probe

Calibration Technology of the Articulated Arm Flexible Cmm

Calibration of Beam Vector Deviation for Four-Axis Precision On-Machine Measurement Using Chromatic Confocal Probe

Design of A Large-Scanning-Range Contact Probe for Nano-Coordinate Measurement Machines

Determination of Aspect Ratio Limitations, Accuracy and Repeatability of a Laser Line Scanning CMM Probe