Abstract:In this paper, by constructing a 3-DOF (Degrees of freedom) laser interferometer on each displacement axis of motion, the main errors during the coordinate measuring machines (CMM) motion are dynamically monitored. The 3-DOF laser interferometer is composed of three-beam dual-frequency laser interferometers, and each dual-frequency laser interferometer obtains the reflection signal through a corner cube reflector. By determining the position parameters of the three corner cube reflectors and three sets of feedback signals, the 3-DOF laser interferometer can calculate the three parameters, i.e., the axial displacement and the lateral pitch and yaw angles. The device is installed on each motion axis of the CMM to monitor 9 major errors during the whole motion system. Laser signals are used to track position information by establishing the rigid body transformation relationship. Therefore, the 9 errors can be updated in real time through the monitoring system to replace the calibration results to calculate the probe position. The position error of the CMM probe caused by the dynamic error is simulated. Monte Carlo method is employed to obtain the error situation and monitor the residual error distribution throughout the measurement movement process. The errors can be corrected immediately without recalibrating the CMM error parameters especially when the dynamic error changes significantly. In addition, environmental errors are also introduced in the model to analyze the impact on the accuracy of position monitoring. The method proposed can reduce the position monitoring error within 0.1 mu m. Using this method, the error source of a dynamic error monitoring system can be designed in a simulated environment, which can be used as the basis for the design of the dynamic error monitoring system.

Dynamic errors analysis of CMM touch trigger probes

Modeling and Simulation of CMMs Probe Trigger Pre-Travel Error

Dynamic Error Modeling and Compensation of a Scanning Probe on CMM

Analytical Calculation of the Measuring Error of an Electromagnetic Velocity Probe Caused by a Side Channel Wall

Study on dynamic measurement uncertainty evaluation for CMMs

A rigid-flexible coupling pretravel error model for a touch-trigger probe in an on-machine inspection system

Precision Measurement of Z -Slide Vertical Error Motion of an Ultra-Precision Lathe by Using Three-Probe Method

Error Correction Of Laser Scanning System For Reverse Engineering

Analysis of mechanical errors of planar capacitive sensor for two dimensional displacement measurement

2D Lobbing Characteristics of Touch Trigger Probes with Spring/Magnet Return Mechanism

Implementation and Verification of a Four-Probe Motion Error Measurement System for a Large-Scale Roll Lathe Used in Hybrid Manufacturing

Uncertainty Evaluation Study of CMM Dynamic Measurement Based on Quasi Monte Carlo Method

Dynamic Confocal Optical Probe Based on Time Difference Measurement

Nonlinear analysis of cylindrical capacitive sensor used for measuring high precision spindle rotation errors

On-line Qualification of a Micro Probing System for Precision Length Measurement of Micro-Features on Precision Parts

Modeling And Simulation Of Dynamic Errors In A Coordinate Measuring Machine With 3-Dof Laser Interferometer

Comparison of Three Compensation Methods for the Touch-trigger Probe Pretravel Errors

Geometric Analysis of Measurement Errors in a Surface Metrology Class with Closed-Loop Probes

Efficient Calibration of a Scanning Probe on CMM

Touch-Trigger Probe Error Compensation for Nonvertical On-Machine Measurement of Freeform Surface Workpieces

Analysis and Modeling of the Radius Error of Touch Trigger Probes in On-machine Verification System