Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. Aluminium matrix composites significantly benefit the manufacturing sector due to the high strength-to-weight ratio. However, grain refinement was one of the major problems faced by the research community and also as-cast AA6063 contained eutectic silicon with sharp, long elongated laths that consequently reduces strength and limit their applications. So, the prime novelty of this research work is to refine the grains by performing the cold rolling operation in AA6063 and incorporating rice husk ash and coal fly ash in the AA6063 matrix to break those eutectic laths which attributes to the enhancement of the mechanical properties. Rice husk ash and coal fly ash were chosen because they are economical, possess low density and are available in enormous quantities as solid waste by-products. They contain a substantial concentration of SiO2 and serve as a viable reinforcement for improving the mechanical properties of aluminium composites. In this research, the grain characteristics along with the mechanical properties of aluminium composites reinforced with rice husk ash and coal fly ash, produced by the stir casting technique were investigated. The reinforcements were added in varying concentrations (1.5 and 3.0 wt.%). Six specimens were fabricated of which five were cold rolled. Image J and Origin software was used in evaluating the average grain size of the fabricated alloys and their composites. The results were discussed with the help of grain size distribution and profile plots. Structural and composition studies were done using scanning electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction spectroscopy. Hardness and tensile tests were performed on the fabricated composites. The outcome of this research reveals, AA6063-3 wt.% rice husk ash composite has improved hardness (84HV) and tensile strength (156 MPa). Moreover, the average grain size of 10.52 μm was the main reason for the attainment of enhanced mechanical properties.

Fracture Toughness of AA2024 Aluminum Fly Ash Metal Matrix Composites

Mechanical and Micro-Structural Behavior of Lignite Coal Based Fly-Ash and Microsphere Reinforced Al 6061 Metal Matrix Composite

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

Novel MMC microstructure with tailored distribution of the reinforcing phase

Physical, Mechanical, and Tribological Properties of Industrial Waste Fly Ash Reinforced AA5083 Composites Fabricated by Stir Casting Process

Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process

Comparisons of Experimental Fracture Toughness Testing Methods of Al6061–Graphite Particulate Composites

Mechanical properties and fractography of SiC and fly ash particulates reinforced Al2024 alloy aerospace metal composites

Evaluation of Mechanical and Thermal Properties of Aluminium-7475 Reinforced with Graphite and Fly ash

Development and wear behavior investigation on aluminum-7075/B4C/fly ash metal matrix composites

Experimental Investigation on Metal Matrix Nanocomposite: Aluminium Alloy 6061 and 7075 with SiC and Fly Ash

Damping properties of aluminum matrix–fly ash composites

Enhancing wear resistance of aluminum 6061 composites with fly ash: A sustainable approach for industrial applications

Investigation on Mechanical and Fracture Behavior of Magnesium Composite Reinforced With Hybrid Fly Ash Particulates Synthesized via Friction Stir Processing Route

Experimental investigation of material properties of Al-Sic-fly ash composite

Fly Ash Particle Reinforced AA6061 Composites Produced by Recycling of Aluminum Chips and Fly Ash Particles

Corrosion studies on aluminium-based metal matrix composites reinforced with graphite, SiC and fly ash particles

Influence of Particle Size on Microstructure and Sliding Wear Response of Fly Ash and Rice Husk Ash Reinforced Al6061 MMCs

Enhanced mechanical behaviour and grain characteristics of aluminium matrix composites by cold rolling and reinforcement addition (Rice husk ash and Coal fly ash)

Influence of the Fly Ash Material Inoculants on the Tensile and Impact Characteristics of the Aluminum AA 5083/7.5SiC Composites

Effect of Heat Treatment on Mechanical Properties of Aluminium alloy-Fly ash Metal Matrix Composite