Effects of composite oxide addition on the microstructure and properties of ODS copper

Yong–Qiang Qin,Chen–Yu Deng,Bing Ma,Yi–Fan Zhang,Lai–Ma Luo,Yu–Cheng Wu

DOI: https://doi.org/10.1016/j.jallcom.2023.170380

IF: 6.2

2023-05-31

Journal of Alloys and Compounds

Abstract:Oxide dispersion strengthened copper-based material is widely used in electrical contact materials due to its excellent mechanical and electrical properties. However, researchers have found that large Y 2 O 3 particles have poor interfacial bonding with the copper matrix in the study of oxide dispersion strengthened copper. In this work, Y 4 Zr 3 O 12 nanoparticles were successfully prepared through solid–liquid doping and directly added into oxide dispersion-strengthened copper by mechanical alloying. A scanning electron microscope, a transmission electron microscope, an X-ray diffractometer, and electrical and mechanical tests were used to characterize the microstructure and performance of composite materials. The interfaces between the Y 2 O 3 /Y 4 Zr 3 O 12 nanoparticles and Cu were systematically studied. The interface bonding between Y 4 Zr 3 O 12 and Cu was better than that of Y 2 O 3 and Cu. The effect of different Y 4 Zr 3 O 12 contents (1, 3, and 5 wt%) on the microstructure and mechanical properties of the composites was studied. Results showed that the Cu-3 wt% Y 4 Zr 3 O 12 composites exhibited the best comprehensive properties. The Vickers hardness, yield strength, ultimate tensile strength, maximum engineering strain, and electrical conductivity of the Cu-3 wt% Y 4 Zr 3 O 12 composites were 132HV, 203.5 MPa, 284.7 MPa, 15.8 %, and 90.3 % International Annealed Copper Standard, respectively.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering