Abstract:GaN/InGaN light emitting diodes(LEDs)grown on sapphire substrates have current transport along the lateral direction.This often results in non-uniform current spreading,which leads to the non-uni-formity of luminescence and the reduction of lifetime.Therefore,proper mesa structure should be designed to improve current spreading.The characteristics of the GaN/InGaN LED have been examined from the view point of uniform current spreading and low series resistance.A steady-state current field model is employed to describe the current spreading of GaN based LED.Finite element method is used to simulate the current distribution of different types of LEDs in three dimensions.The series resistance of the LED is derived from the calculated current spreading.Standards to quantitatively evaluate the uniformity of current spreading are presented.By quantitatively comparing the series resistance and current spreading of LEDs with different mesa structures,we find that that the LED with the interdigitated mesa structure has the lowest series resistance under the process conditions of our lab.Parameters of the interdigitated mesa structure are further optimized based on our model to achieve the smallest series resistance.Two types of LEDs,denoted as Sample A and Sample B,are prepared with a chip size of 1 mm×1 mm.Sample A is fabricated using the optimized interdigitated electrode pattern as described above,while Sample B is fabricated using a ring electrode pattern without optimization for comparison.By measuring the I-V curve,the values of series resistance of the three samples are derived,which are 1.6 Ω and 3.6 Ω for Sample A and Sample B,respectively.The resistance of the former one is only 44.4% of the latter one,which is consistent with the calculated results based on our model.The reduction in resistance will lead to the improvement of the efficiency of LEDs.

Investigation and modeling of the role of interface defects in the optical degradation of InGaN/GaN LEDs

Modeling the electrical characteristics of InGaN/GaN LED structures based on experimentally-measured defect characteristics

Theoretical considerations on efficiency degradation due to thermal effect in a planar GaN-based LED with a GaN substrate

Modeling the electrical degradation of AlGaN-based UV-C LEDs by combined deep-level optical spectroscopy and TCAD simulations

Modeling of the Electrical Characteristics and Degradation Mechanisms of UV-C LEDs

Investigation of degradation dynamics of 265 nm LEDs assisted by EL measurements and numerical simulations

Characterisation of Defects at Non-Polar GaN/InGaN Junctions in Novel Materials for Application in Light Emitting Diodes

Efficiency degradation induced by surface defects-assisted tunneling recombination in GaN/InGaN micro-light-emitting diodes

Study of Defect Density and Aging Properties of GaN LEDs

Degradation of AlGaN/GaN Schottky diodes on silicon: Role of defects at the AlGaN/GaN interface

Investigation of InGaN/GaN Laser Degradation Based on Luminescence Properties

Simulation of GaN-Based Light Emitting Diodes Incorporating Composition Fluctuation Effects

Hot-electron Induced Degradations in GaN-based LEDs Fabricated on Nanoscale Epitaxial Lateral Overgrown Layers

An Improved Carrier Rate Model To Evaluate Internal Quantum Efficiency And Analyze Efficiency Droop Origin Of Ingan Based Light-Emitting Diodes

Study on Aging Properties of GaN LEDs Based on the Measurement of Nonradiative Recombination Defect Density

Degradation Study of InGaN-based Laser Diodes Grown on Si

Impact of interfaces on photoluminescence efficiency of high indium content InGaN quantum wells

Cathodoluminescence as an Effective Probe of Carrier Transport and Deep Level Defects in Droop-Mitigating InGaN/GaN Quantum Well Heterostructures

Finite Element Model of GaN Based LED and the Optimization of the Mesa Structure

Aging Mathematical Model of InGaN/GaN LEDs Based on Non-Radiative Recombination

Degradation mechanism beyond device self-heating in high power light-emitting diodes