Abstract:Solid concentration and particle velocity distributions in the transition section of a ϕ 200mm turbulent fluidized bed (TFB) and a ϕ 200mm annulus turbulent fluidized bed (A-TFB) with a ϕ 50mm central standpipe were measured using a PV6D optical probe. It is concluded that in turbulent regime, the axial distribution of solid concentration in A-TFB was similar to that in TFB, but the former had a shorter transition section. The axial solid concentration distribution, probability density, and power spectral distributions revealed that the standpipe hindered the turbulence of gas–solid two-phase flow at a low superficial gas velocity. Consequently, the bottom flow of A-TFB approached the bubbling fluidization pattern. By contrast, the standpipe facilitated the turbulence at a high superficial gas velocity, thus making the bottom flow of A-TFB approach the fast fluidization pattern. Both the particle velocity and solid concentration distribution presented a unimodal distribution in A-TFB and TFB. However, the standpipe at a high gas velocity and in the transition or dilute phase section significantly affected the radial distribution of flow parameters, presenting a bimodal distribution with particle concentration higher near the internal and external walls and in downward flow. Conversely, particle concentration in the middle annulus area was lower, and particles flowed upward. This result indicated that the standpipe destroyed the core-annular structure of TFB in the transition and dilute phase sections at a high gas velocity and also improved the particle distribution of TFB. In conclusion, the standpipe improved the fluidization quality and flow homogeneity at high gas velocity and in the transition or dilute phase section, but caused opposite phenomena at low gas velocity and in the dense-phase section.

Hydrodynamic analysis of carbon nanotube in pilot-scale distributor-less tapered fluidized bed

Solid Concentration and Velocity Distributions in an Annulus Turbulent Fluidized Bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

The motion mechanism and characteristic of bubble in a pseudo-2D tapered fluidized bed

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Design and Experimental Study of a Tapered Fluidized Bed Reactor without a distributor of Carbon Nanotubes

Distribution and Movement of Fine Particles Injected in a Gas–solid Fluidized Bed with Hydrocarbon Liquid Spray

Hydrodynamics and Gas Mixing in A Carbon Nanotube Agglomerate Fluidized Bed

Research on Fluidization Performance of Different Tapered Fluidized Bed Reactors for Fluidizing Carbon Nanotubes

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

Understanding Interfacial Dynamics: Hydrostatic Pressure-Induced Sono-Dispersion of Carbon Nanotubes

Fluidization characteristics, solids distributions and gas mixing of a carbon nanotube agglomerate fluidized bed

On-line intermittent growth of carbon nanotubes in a self-made tapered fluidized bed reactor at different inlet distances

Effect of Bed Thickness on a Pseudo 2D Gas-Solid Fluidized Bed Turbulent Flow Structures and Dynamics

Numerical computation drives "Transport-reaction" of carbon nanotube growth processes in fluidized bed reactors—A review

Mechanism of Carbon Nanotube Growth in a Nano-agglomerate Fluidized Bed

A Numerical Study on Gas-Fluidized Beds of Wet Flexible Fibers

CFD-DEM study of impacts of the porous distributor medium on fluidization characteristics of a 2D-fluidized bed

The Mass Production of Carbon Nanotubes Using a Nano-Agglomerate Fluidized Bed Reactor: A Multiscale Space–time Analysis

CFD modeling of gas–solid flow in a two‐stage jetting fluidized bed with an overflow standpipe

Agglomerated carbon nanotubes and its mass production in a fluidized-bed reactor