Abstract:Solid concentration and particle velocity distributions in the transition section of a ϕ 200mm turbulent fluidized bed (TFB) and a ϕ 200mm annulus turbulent fluidized bed (A-TFB) with a ϕ 50mm central standpipe were measured using a PV6D optical probe. It is concluded that in turbulent regime, the axial distribution of solid concentration in A-TFB was similar to that in TFB, but the former had a shorter transition section. The axial solid concentration distribution, probability density, and power spectral distributions revealed that the standpipe hindered the turbulence of gas–solid two-phase flow at a low superficial gas velocity. Consequently, the bottom flow of A-TFB approached the bubbling fluidization pattern. By contrast, the standpipe facilitated the turbulence at a high superficial gas velocity, thus making the bottom flow of A-TFB approach the fast fluidization pattern. Both the particle velocity and solid concentration distribution presented a unimodal distribution in A-TFB and TFB. However, the standpipe at a high gas velocity and in the transition or dilute phase section significantly affected the radial distribution of flow parameters, presenting a bimodal distribution with particle concentration higher near the internal and external walls and in downward flow. Conversely, particle concentration in the middle annulus area was lower, and particles flowed upward. This result indicated that the standpipe destroyed the core-annular structure of TFB in the transition and dilute phase sections at a high gas velocity and also improved the particle distribution of TFB. In conclusion, the standpipe improved the fluidization quality and flow homogeneity at high gas velocity and in the transition or dilute phase section, but caused opposite phenomena at low gas velocity and in the dense-phase section.

Design and Experimental Study of a Tapered Fluidized Bed Reactor without a distributor of Carbon Nanotubes

Research on Fluidization Performance of Different Tapered Fluidized Bed Reactors for Fluidizing Carbon Nanotubes

Flow Distribution in a Novel Fixed Bed Bionic Reactor

Heat Transfer Characteristics Analysis and Optimization of the Micro Packed Bed Bionic Reactor

On-line intermittent growth of carbon nanotubes in a self-made tapered fluidized bed reactor at different inlet distances

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Solid Concentration and Velocity Distributions in an Annulus Turbulent Fluidized Bed

Hydrodynamic analysis of carbon nanotube in pilot-scale distributor-less tapered fluidized bed

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

The motion mechanism and characteristic of bubble in a pseudo-2D tapered fluidized bed

Production of Carbon Nanotubes in A Packed Bed and A Fluidized Bed

Agglomerated carbon nanotubes and its mass production in a fluidized-bed reactor

Numerical computation drives "Transport-reaction" of carbon nanotube growth processes in fluidized bed reactors—A review

Mechanism of Carbon Nanotube Growth in a Nano-agglomerate Fluidized Bed

Production of High Quality Single-Walled Carbon Nanotubes in a Nano-Agglomerated Fluidized Bed Reactor

Highly Selective Synthesis of Single-Walled Carbon Nanotubes from Methane in a Coupled Downer-turbulent Fluidized-Bed Reactor

Control of Pressure Balance and Solids Circulation Characteristics in DCFB Reactors

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

The Large-Scale Production of Carbon Nanotubes in A Nano-Agglomerate Fluidized-Bed Reactor

Synthesis of High‐Quality, Double‐Walled Carbon Nanotubes in a Fluidized Bed Reactor

Impact of the Reactor Structure on Biomass Pyrolysis in Fluidized-Bed Reactors: A Coarse-Grained CFD-DEM Study