Abstract:Ultra-precision thinning technology using workpiece self-rotational grinding followed by chemical mechanical polishing (CMP) is extensively applied in the integrated circuit manufacturing process, which enables to obtain large size ultra-thin silicon wafers with high material removal rate and low damage layer thickness. However, an in-depth understanding of the influence caused by ground surface topography on material removal mechanism in silicon CMP process has not been revealed yet. This work systematically investigates the contact characteristics of the wafer-pad interface and corrosion behaviors of the ground silicon wafer immersed in polishing solution. Firstly, some silicon wafers are ground using different wheels and subsequently polished. The material removal depth during the whole CMP process is measured. Then, the intrinsic model of polishing pad is determined via mechanical property tests. A finite element method is adopted to evaluate the contact status, displacement distortion and stress distribution at the contact region between pad and ground wafer surface. Moreover, the chemical reaction mechanism between ground silicon wafer and polishing solution is revealed by utilizing X-ray photoelectron spectroscopy and electrochemical analysis. The influence of wafer surface topography on corrosion resistance in CMP process is illustrated. Finally, corresponding experimental results are explained from an atomic scale by a ReaxFF reactive molecular dynamics simulation model. This presented study demonstrates the corrosion promotion principle of ground silicon wafer in CMP process.

Evaluation of polishing induced subsurface damage in InAs substrates by an acid solution etching method

Investigation of ICP Etching Damage of InAsP/InP Strained Multiple Quantum Wells

Subsurface Damage Detection And Damage Mechanism Analysis Of Chemical-Mechanical Polished Optics

Effect of Dry Etching on Light Emission of InAsP/InP SMQWs

Analyses of Sub-surface Damages in Quartz Crystal Wafers

Investigation On Hf Based Etching Of The Polished K9 Glasses And Its Application In The Subsurface Damage

Plasma etching of III-V semiconductors and mechanism of crystalline damage

Plasma etching ofⅢ-Ⅴsemiconductors and mechanism of crystalline damage

Defect Control and High Quality Surface Preparation of InP Substrate

Sub-surface Damage of Ultra-Thin Monocrystalline Silicon Wafer Induced by Dry Polishing

Effects of grinding-induced surface topography on the material removal mechanism of silicon chemical mechanical polishing

Research on Surface Polishing and Corrosion of InSb Chip

Towards Investigating Surface Quality of Single-Crystal Silicon Optics Polished with Different Processes

In-situ characterization of subsurface microdefects and damage threshold of the fused silica

Identification of subsurface damage of 4H-SiC wafers by combining photo-chemical etching and molten-alkali etching

Single crystal silicon wafer polishing by pretreating pad adsorbing SiO2 grains and abrasive-free slurries

The Deterioration Characteristics and Mechanism of Polishing Pads in Chemical Mechanical Polishing of Fused Silica

Scratching by Pad Asperities in Copper Electrochemical-Mechanical Polishing

Evaluation of residual stress in InP and InAs (100) substrates obtained from single crystals grown by LEC and VGF methods

In-situ reconditioning mechanism for fixed abrasive pads based on the wear behavior of loose grains

Subsurface Damage Detection on Ground Silicon Wafers Using Polarized Laser Scattering