Abstract:Coherent cuboidal precipitation of γ′ (Ni3Al) phases can significantly improve the high temperature properties of Cu–Ni–Al alloys, in which, substantial γ′ phases and a suitable lattice misfit degree between γ (Cu matrix) and γ′ phase (δγ-γ′) is necessary. However, the re-dissolution and grain boundary discontinuous precipitation would induce the degradation of heating resistance in the alloys with higher Cu content. Herein introducing Si with strong elemental interaction to resolve this issue. In this research, series of Cu85.71Ni10.72-x Al3.57Six (x = 0, 0.45, 0.89, 1.34 and 1.79) alloys are designed and prepared, and the effect of Si addition on microstructure, properties at room or high temperature are investigated. The results demonstrate that Si with completely solution state has an effect on the promoting of γ′ precipitation and suppression of the discontinuous precipitation. Meanwhile, Si addition regulates the δγ-γ′, transforming the shape of γ′ phases from spherical to cuboidal and delaying the re-dissolution of γ′ phase and improving the stability of matrix. First-principles calculations and work function results indicate that Gibbs free energy ΔG of γ′ phase decreases as well as exhibiting a more negative cohesive energy Eb for a suitable Si addition, which enables the alloys to be more stable and homogeneous. Si exhibits a good optimization effect for Cu–Ni–Al–Si alloy, which leads to excellent high temperature properties that can be extended to alloys with higher Cu content by Si addition. Therefore, multi-componentization is an efficient way to improve the properties of Cu–Ni–Al alloys, and an appropriate match in elemental interaction is crucial. The research provides theoretical and experimental basis for the development of heat-resistant Cu alloy with good comprehensive properties.

Evolutions in precipitates, microstructure and properties of cold-worked CuNiCoSi alloy during short-time solid solution

Simultaneously Enhanced Hardness and Electrical Conductivity in a Cu-Co-Si Alloy by Optimizing Solid Solution Treatment

Microstructure and Precipitate Evolution in Cu-3.2Ni-0.75Si Alloy Processed by Twin-Roll Strip Casting

Combined experimental and computational investigation of precipitation behaviour and mechanical properties in a novel Cu–Ni–Si–Co alloy: effect of solution treatment temperature

Solidification Microstructure in a Supercooled Binary Alloy

Enhanced mechanical properties and strengthening mechanism of Cu-Ni-Si alloy with trace chromium addition

The Effect of Al on Microstructure and Properties of Cu-15Ni-8Sn During the Aging

Microstructure and Precipitate's Characterization of the Cu-Ni-Si-P Alloy

Microstructure evolution and precipitation behaviour of the Cu-Ni-Si-Cr alloy based on twin-roll strip casting

Study on the Ageing Process of a Super High-strength Cu-Ni-Si Alloy

Effect of solid solution process on the structure and properties of Cu-Cr-Mg alloy in the aging state

The Microstructure Evolution and Dynamic Recrystallization Mechanism of Cu-1.1–Ni-0.7–Co-0.45–Si-0.3Cr Alloys during High-Temperature Deformation

Simultaneously enhancing the strength and electrical conductivity of Cu-Ni-Sn alloy through plastic deformation of an intermetallic compound

Microstructure and Mechanical Properties of Cast Cu-15Ni-8Sn Alloy

Effects of cold deformation and aging on the phase transformation and mechanical properties of a Cu-15Ni-8Sn alloy

Strong elemental interaction enhances the thermal stability of coherent precipitation strengthened Cu–Ni–Al alloys

Significantly enhanced high-temperature mechanical properties of Cu-Cr-Zn-Zr-Si alloy with stable second phases and grain boundaries

Transformation and Strengthening of Early Stage of Aging in Cu-3.2Ni-0.75Si Alloy

Microstructure and Property Evolution of Cu–9Ni–6Sn-xCr Alloys During Thermo-Mechanical Treatment Process

Effect of Aging Temperature on Microstructure and Properties of Cold-Rolled Cu-Ni-Si Alloy

CoTi Precipitates: the Key to High Strength, High Conductivity and Good Softening Resistance in Cu-Co-Ti Alloy