Abstract:Coherent cuboidal precipitation of γ′ (Ni3Al) phases can significantly improve the high temperature properties of Cu–Ni–Al alloys, in which, substantial γ′ phases and a suitable lattice misfit degree between γ (Cu matrix) and γ′ phase (δγ-γ′) is necessary. However, the re-dissolution and grain boundary discontinuous precipitation would induce the degradation of heating resistance in the alloys with higher Cu content. Herein introducing Si with strong elemental interaction to resolve this issue. In this research, series of Cu85.71Ni10.72-x Al3.57Six (x = 0, 0.45, 0.89, 1.34 and 1.79) alloys are designed and prepared, and the effect of Si addition on microstructure, properties at room or high temperature are investigated. The results demonstrate that Si with completely solution state has an effect on the promoting of γ′ precipitation and suppression of the discontinuous precipitation. Meanwhile, Si addition regulates the δγ-γ′, transforming the shape of γ′ phases from spherical to cuboidal and delaying the re-dissolution of γ′ phase and improving the stability of matrix. First-principles calculations and work function results indicate that Gibbs free energy ΔG of γ′ phase decreases as well as exhibiting a more negative cohesive energy Eb for a suitable Si addition, which enables the alloys to be more stable and homogeneous. Si exhibits a good optimization effect for Cu–Ni–Al–Si alloy, which leads to excellent high temperature properties that can be extended to alloys with higher Cu content by Si addition. Therefore, multi-componentization is an efficient way to improve the properties of Cu–Ni–Al alloys, and an appropriate match in elemental interaction is crucial. The research provides theoretical and experimental basis for the development of heat-resistant Cu alloy with good comprehensive properties.

The strengthening role of micro-sized phases and nano-precipitates in Al–Mg 2 Si–Cu(–Ni) alloys at 25 °C and 350 °C

Strong elemental interaction enhances the thermal stability of coherent precipitation strengthened Cu–Ni–Al alloys

Precipitates evolution and strengthening of Al–Mg2Si alloys containing high-Cu contents during ageing process

Alloying effect of Mg on microstructure and mechanical properties at 300 °C of Al–5Cu–1Mn–0.5Ni heat-resistant alloy

Effects of Cu Addition on the Microstructure and Properties of the Al–Mn–Fe–Si Alloy

Stabilizing Al–Mg–Si–Cu alloy by precipitation nano-phase control

Micro-alloying effects of Mn and Zr on the evolution of ageing precipitates and high temperature strength of Al-11.5Si–4Cu alloy after a long-time heat exposure

The effect of solution temperature on the precipitates evolution and aging hardening response of Al-15%Mg2Si(-1%Cu) alloys

Atomistic determination on stability, cluster and microstructures in terms of crystallographic and thermo-kinetic integration of Al−Mg−Si alloys

Effects of Low Nickel Content on Microstructure and High-Temperature Mechanical Properties of Al-7Si-1.5Cu-0.4Mg Aluminum Alloy

Microstructure and Mechanical Properties of Cast Al-Si-Cu-Mg-Ni-Cr Alloys: Effects of Time and Temperature on Two-Stage Solution Treatment and Ageing

Achievement of High Strength and Ductility in Al–Si–Cu–Mg Alloys by Intermediate Phase Optimization in As-Cast and Heat Treatment Conditions

Microstructure and properties of Cu–Ni–Co–Si–Cr–Mg alloys with different Si contents after multi-step thermo-mechanical treatment

Microstructural Evolution, Precipitation Behavior, and Mechanical Property Response of Cast Al–Li–Cu–Cd–Mn–Zr–Ti Alloy

Microstructural evolution and mechanical properties of cast Al‐2.6Li‐2.8Mg‐(0.5, 1.4)Cu‐0.2Zr‐0.2Sc alloys during heat treatment

Effects of Zr and Sr on microstructure and mechanical properties of cast Al–Si–Cu–Ni–Mg alloy

High Temperature Tensile Deformation Behavior of New Heat Resistant Aluminum Alloy

Significantly enhanced high-temperature mechanical properties of Cu-Cr-Zn-Zr-Si alloy with stable second phases and grain boundaries

Effect of Cu addition on precipitation and age-hardening response of an Al-15%Mg2Si alloy

Micro-alloying effects of Ni on the microstructure and mechanical properties of an Al-Zn-Mg-Cu-Sc-Zr alloy

Coupled solute effects enable anomalous high-temperature strength and stability in nanotwinned Al alloys