Abstract:Coherent cuboidal precipitation of γ′ (Ni3Al) phases can significantly improve the high temperature properties of Cu–Ni–Al alloys, in which, substantial γ′ phases and a suitable lattice misfit degree between γ (Cu matrix) and γ′ phase (δγ-γ′) is necessary. However, the re-dissolution and grain boundary discontinuous precipitation would induce the degradation of heating resistance in the alloys with higher Cu content. Herein introducing Si with strong elemental interaction to resolve this issue. In this research, series of Cu85.71Ni10.72-x Al3.57Six (x = 0, 0.45, 0.89, 1.34 and 1.79) alloys are designed and prepared, and the effect of Si addition on microstructure, properties at room or high temperature are investigated. The results demonstrate that Si with completely solution state has an effect on the promoting of γ′ precipitation and suppression of the discontinuous precipitation. Meanwhile, Si addition regulates the δγ-γ′, transforming the shape of γ′ phases from spherical to cuboidal and delaying the re-dissolution of γ′ phase and improving the stability of matrix. First-principles calculations and work function results indicate that Gibbs free energy ΔG of γ′ phase decreases as well as exhibiting a more negative cohesive energy Eb for a suitable Si addition, which enables the alloys to be more stable and homogeneous. Si exhibits a good optimization effect for Cu–Ni–Al–Si alloy, which leads to excellent high temperature properties that can be extended to alloys with higher Cu content by Si addition. Therefore, multi-componentization is an efficient way to improve the properties of Cu–Ni–Al alloys, and an appropriate match in elemental interaction is crucial. The research provides theoretical and experimental basis for the development of heat-resistant Cu alloy with good comprehensive properties.

Stabilizing Al–Mg–Si–Cu alloy by precipitation nano-phase control

The strengthening role of micro-sized phases and nano-precipitates in Al–Mg 2 Si–Cu(–Ni) alloys at 25 °C and 350 °C

Stabilizing nanoprecipitates in Al-Cu alloys for creep resistance at 300°C

Microstructure and Mechanical Behavior of Quaternary Eutectic α+θ+Q+Si Clusters in As-Cast Al-Mg-Si-Cu Alloys

Highly stable coherent nanoprecipitates via diffusion-dominated solute uptake and interstitial ordering

Atomistic determination on stability, cluster and microstructures in terms of crystallographic and thermo-kinetic integration of Al−Mg−Si alloys

Regulation of precipitation behavior among T1, S', and θ' phases in Al–Cu–Li-(Mg–Ag) alloys by optimizing Ag/Mg ratios

Influence of Si on the Elevated-Temperature Mechanical and Creep Properties of Al–Cu 224 Cast Alloys during Thermal Exposure

Microstructural evolution and mechanical properties of cast Al‐2.6Li‐2.8Mg‐(0.5, 1.4)Cu‐0.2Zr‐0.2Sc alloys during heat treatment

Precipitation behavior during re-aging of Al-Mg-Si-Cu alloy

Thermal stability and mechanical properties of Ti–22Al–25Nb alloy with different initial microstructures

Superior high temperature creep resistance of a cast Al–Mg–Ca-Sc alloy with multi-scale hierarchical microstructures

Strong elemental interaction enhances the thermal stability of coherent precipitation strengthened Cu–Ni–Al alloys

Precipitation behavior of an Al–Cu–Li–X alloy and competing relationships among precipitates at different aging temperatures

Tailoring the heterophase interfacial structures to improve both strength and ductility of Al-Li alloys by fine tuning major solute Mg

Effect of combined addition of Ag and Cu on the precipitation behavior for an Al-Mg-Si alloy

Microstructure and properties evolution of Al–17Si–2Fe alloys with addition of quasicrystal Al–Mn–Ti master alloy

Thermal Stability of Al-Cu-Mg Alloys

Study of the precipitate evolution mechanism in an Al-Mg-Si-Cu alloy with Si-rich and low Cu composition

Achievement of High Strength and Ductility in Al–Si–Cu–Mg Alloys by Intermediate Phase Optimization in As-Cast and Heat Treatment Conditions

Study on properties and precipitation behavior of 6000 series alloys with high Mg/Si ratios and Cu contents