Abstract:Solute clustering and precipitation in an Al-Cu-Mg-Ag-Si model alloy has been investigated by atom probe tomography (APT) as well as high-angle annular dark-field (HAADF) imaging and electron energy loss spectroscopy (EELS) in the scanning transmission electron microscope (STEM). Nine types of solute clusters (Cu, Ag, Mg-Cu, Mg-Ag, Mg-Cu-Si, Mg-Ag-Si, Mg-Ag-Cu, Cu-Ag-Si and MgAgCuSi) were observed by APT in both the as-quenched alloy and after ageing the alloy at 180 degrees C for 1 h. Three types of precipitates (Omega (AlCuMgAg), theta (Al2Cu) and Mg2Si) were observed by APT and HAADF-STEM after further ageing at 180 degrees C for 24 h and 100 h. We propose that MgAgCu and MgAgCuSi clusters are likely to be responsible for the formation of the Omega (AlCuMgAg) phase. Furthermore, we also suggest that the theta (Al2Cu) phase forms from Cu clusters and the Mg2Si phase forms from the decomposition of MgAgSi and MgAgCuSi clusters by losing Ag to Omega phase growth. Many early binary clusters (Mg-Cu, Mg-Ag) do not seem to undergo a significant further growth during ageing; these are more likely to be transformed into complex ternary and quaternary clusters and be subsequently consumed during the growth of large clusters/precipitates. Furthermore, it is proposed that the plate-like Omega (AlCuMgAg) precipitates evolve continuously from the MgAgCu and MgAgCuSi clusters, rather than via heterogeneous nucleation on their precursors (i.e. MgAgCu and MgAgCuSi clusters). More interestingly, even after ageing at 180 degrees C for 100 h, the Omega (AlCuMgAg) precipitates remain coherent with the alpha-Al matrix, indicating that these precipitates have a high thermal stability. This can mainly be attributed to the presence of a single Mg-Ag-rich monolayer observed at the interface between the Omega precipitate and the alpha-Al matrix, significantly improving the coarsening resistance of the Omega (AlCuMgAg) precipitates. Our results thus reveal links between a variety of solute clusters and the different types of precipitates in the Al-Cu-Mg-Ag-Si model alloy. Such information can in the future be used to control the precipitation by tailoring solute clustering.

Microstructure and Mechanical Behavior of Quaternary Eutectic α+θ+Q+Si Clusters in As-Cast Al-Mg-Si-Cu Alloys

Effects of Cu Content and Cu/Mg Ratio on the Microstructure and Mechanical Properties of Al–Si–Cu–Mg Alloys

Investigation of the As-Solidified Microstructure of an Al–Mg–Si–Cu Alloy

Effects of Si Addition on the Microstructure Evolution of Al–Cu–Mg Alloys in the Α + S + T Phase Field

Study of the Q′ (Q)-Phase Precipitation in Al–Mg–Si–Cu Alloys by Quantification of Atomic-Resolution Transmission Electron Microscopy Images and Atom Probe Tomography

Effect of Si on As-Cast Microstructure in Quasicrystalline Al-Cu -Fe Alloy

Microstructure and Mechanical Properties of Cast Al-Li-Mg Alloy: Role of Cu Addition and Heat Treatment

Microstructural Evolution and Mechanical Properties of Al-Si-Mg-Cu Cast Alloys with Different Cu Contents

Solute Clustering and Precipitation in an Al–Cu–Mg–Ag–Si Model Alloy

Investigating the role of Cu, Zr and V on the evolution of microstructure and properties of Al-Si-Mg cast alloys

The Disordered Structure of Q′ and C Phases in Al–Mg–Si–Cu Alloy

Investigation of the Influences of Ternary Mg Addition on the Solidification Microstructure and Mechanical Properties of As-Cast Al–10Si Alloys

Microstructure and properties evolution of Al–17Si–2Fe alloys with addition of quasicrystal Al–Mn–Ti master alloy

The Structural and Compositional Evolution of Precipitates in Al-Mg-Si-Cu Alloy

Study of the precipitate evolution mechanism in an Al-Mg-Si-Cu alloy with Si-rich and low Cu composition

Stabilizing Al–Mg–Si–Cu alloy by precipitation nano-phase control

Microstructure and Mechanical Properties of the As‐Cast AlLiCuMgZr Alloy with High Li Content and Different Cu/Mg Ratios

Interface Structures and Thickening Mechanisms of the Q′ and QP2 Phases for Al-Mg-Si-Cu Alloys

Microstructure evolution of a novel low-silicon cast aluminum alloy modified with Mn and Cr during solution treatment

Microstructures and phase transformation of Al-based composite materials reinforced by Al-Cu-Co decagonal quasicrystalline particles

Influence of Mg and Cu on Precipitation Behaviors and Mechanical Properties of Al-Si Alloys