Abstract:Solute clustering and precipitation in an Al-Cu-Mg-Ag-Si model alloy has been investigated by atom probe tomography (APT) as well as high-angle annular dark-field (HAADF) imaging and electron energy loss spectroscopy (EELS) in the scanning transmission electron microscope (STEM). Nine types of solute clusters (Cu, Ag, Mg-Cu, Mg-Ag, Mg-Cu-Si, Mg-Ag-Si, Mg-Ag-Cu, Cu-Ag-Si and MgAgCuSi) were observed by APT in both the as-quenched alloy and after ageing the alloy at 180 degrees C for 1 h. Three types of precipitates (Omega (AlCuMgAg), theta (Al2Cu) and Mg2Si) were observed by APT and HAADF-STEM after further ageing at 180 degrees C for 24 h and 100 h. We propose that MgAgCu and MgAgCuSi clusters are likely to be responsible for the formation of the Omega (AlCuMgAg) phase. Furthermore, we also suggest that the theta (Al2Cu) phase forms from Cu clusters and the Mg2Si phase forms from the decomposition of MgAgSi and MgAgCuSi clusters by losing Ag to Omega phase growth. Many early binary clusters (Mg-Cu, Mg-Ag) do not seem to undergo a significant further growth during ageing; these are more likely to be transformed into complex ternary and quaternary clusters and be subsequently consumed during the growth of large clusters/precipitates. Furthermore, it is proposed that the plate-like Omega (AlCuMgAg) precipitates evolve continuously from the MgAgCu and MgAgCuSi clusters, rather than via heterogeneous nucleation on their precursors (i.e. MgAgCu and MgAgCuSi clusters). More interestingly, even after ageing at 180 degrees C for 100 h, the Omega (AlCuMgAg) precipitates remain coherent with the alpha-Al matrix, indicating that these precipitates have a high thermal stability. This can mainly be attributed to the presence of a single Mg-Ag-rich monolayer observed at the interface between the Omega precipitate and the alpha-Al matrix, significantly improving the coarsening resistance of the Omega (AlCuMgAg) precipitates. Our results thus reveal links between a variety of solute clusters and the different types of precipitates in the Al-Cu-Mg-Ag-Si model alloy. Such information can in the future be used to control the precipitation by tailoring solute clustering.

Study of the precipitate evolution mechanism in an Al-Mg-Si-Cu alloy with Si-rich and low Cu composition

The Structural and Compositional Evolution of Precipitates in Al-Mg-Si-Cu Alloy

Interactive transformation mechanisms of multiple metastable precipitates in a Si-rich Al-Mg-Si alloy

Effect of combined addition of Ag and Cu on the precipitation behavior for an Al-Mg-Si alloy

The Effect of Si on Precipitation in Al–Cu–Mg Alloy with a High Cu/Mg Ratio

The Effect of Cu Addition on the Precipitation Sequence in the Al-Si-Mg-Cr Alloy

The evolution of precipitate crystal structures in an Al-Mg-Si(-Cu) alloy studied by a combined HAADF-STEM and SPED approach

Atomic-scale Investigation into Precipitated Phase Thickening in Al-Si-Mg-Cu Alloy

Solute Clustering and Precipitation in an Al–Cu–Mg–Ag–Si Model Alloy

Investigation of the As-Solidified Microstructure of an Al–Mg–Si–Cu Alloy

Influence of Mg and Cu on Precipitation Behaviors and Mechanical Properties of Al-Si Alloys

Special segregation of Cu on the habit plane of lath-like β′ and QP2 precipitates in Al-Mg-Si-Cu alloys

Study of the Q′ (Q)-Phase Precipitation in Al–Mg–Si–Cu Alloys by Quantification of Atomic-Resolution Transmission Electron Microscopy Images and Atom Probe Tomography

Effect of Ag Addition on the Precipitation Evolution and Interfacial Segregation for Al–Mg–Si Alloy

Evolution of Microstructure and Strain Field by Precipitation During Early Ageing of Al–Si–Mg–Cu Alloy

Effect of Minor Cu Addition on the Precipitation Sequence of an As-Cast Al-Mg-Si 6005 Alloy

A First-Principles Study of the Cu-Containing Β″ Precipitates in Al-Mg-Si-Cu Alloy.

Precipitation behavior during re-aging of Al-Mg-Si-Cu alloy

Effects of Si Addition on the Microstructure Evolution of Al–Cu–Mg Alloys in the Α + S + T Phase Field

Interface Structures and Thickening Mechanisms of the Q′ and QP2 Phases for Al-Mg-Si-Cu Alloys

Precipitation Behavior and Mechanical Properties of Al–1.0Mg–0.6Si–Cu (wt.%) Alloy Controlled by Cu Content