Abstract:Micro-alloying effects of Mn and/or Zr on the microstructure evolution of the ageing precipitates of Al-11.5Si–4Cu alloy (in wt.%) were investigated by TEM observation. The relationship of the microstructure evolution with the variation of mechanical properties is discussed. Mn micro-alloying in Al-11.5Si–4Cu alloy decreases the yield strength at room temperature, but significantly increases the yield strength at 300oC in the state after a long-time heat exposure at 300oC for 100h. Zr micro-alloying remarkably improves the yield strength at room temperature and 300oC, but severely degrades the yield strength at 300oC in the state after the same heat exposure. Zr micro-alloying significantly rises the density of the precipitates of θ′ phase formed during the ageing treatment and simultaneously decreases their size, and hence significantly increases the yield strength at room temperature. For Al-11.5Si–4Cu alloy, it is found that the nano precipitates of θ′ which form during the ageing treatment are almost completely transformed into the coarse equilibrium θ phase during the long-time heat exposure. However, Mn micro-alloying greatly suppresses the formation of θ phase or the phase transformation of θ′ → θ during the long-time heat exposure. Thus, the long-time heat exposure only leads to a small decrease of 6Mpa in the yield strength at 300oC of the alloy with Mn micro-alloying. Zr micro-alloying doesn't improve the thermal stability of θ′ phase during the long-time heat exposure, and conversely promotes the phase transformation of θ′→θ. Thus, after the heat exposure at 300oC for 100h, the yield strength at 300oC of the alloys with Zr micro-alloying is greatly decreased, even lower than that of the base alloy.

Precipitates evolution and strengthening of Al–Mg2Si alloys containing high-Cu contents during ageing process

The Effect of Al on Microstructure and Properties of Cu-15Ni-8Sn During the Aging

Effect of ageing time on strength and microstructures of an Al–Cu–Li–Zn–Mg–Mn–Zr alloy

Effect of Cu addition on precipitation and age-hardening response of an Al-15%Mg2Si alloy

Influence of Mg content on ageing precipitation behavior of Al-Cu-Li-x alloys

The effect of solution temperature on the precipitates evolution and aging hardening response of Al-15%Mg2Si(-1%Cu) alloys

Insight into the aging behavior of a novel Al-Li-Cu-Mg alloy

Effect of ageing and thermal exposure on microstructure and mechanical properties of a HPDC Al–Si–Cu–Mg alloy

Achievement of High Strength and Ductility in Al–Si–Cu–Mg Alloys by Intermediate Phase Optimization in As-Cast and Heat Treatment Conditions

Influence of Mg Contents on Aging Precipitation Behavior of Al–3.5Cu–xMg Alloy

Study on properties and precipitation behavior of 6000 series alloys with high Mg/Si ratios and Cu contents

Ageing response and microstructural evolution of biodegradable Zn-1.5Cu-1.5Ag alloy

Micro-alloying effects of Mn and Zr on the evolution of ageing precipitates and high temperature strength of Al-11.5Si–4Cu alloy after a long-time heat exposure

Co-precipitation of T′ and η′ phase in Al-Zn-Mg-Cu alloys

The strengthening role of micro-sized phases and nano-precipitates in Al–Mg 2 Si–Cu(–Ni) alloys at 25 °C and 350 °C

Ageing evolution process of the θ ′ -phase in Al-Si-Cu-Mg alloys: Atomic-scale observations and first-principles calculations

Precipitation behavior during re-aging of Al-Mg-Si-Cu alloy

Precipitation behavior of an Al–Cu–Li–X alloy and competing relationships among precipitates at different aging temperatures

Effect of multi-stage aging on the precipitation strengthening and mechanical properties for an Al-Mg-Si-Ag alloy

Transformation behavior of precipitates during artificial aging at 170 °C in Al–Mg–Si–Cu alloys with and without Zn addition

Study on the microstructure and age hardening capability in Al–Cu–Li alloys with different Cu/Li ratio