Abstract:Selective laser melting (SLM) technology is promising to fabricate complex-shaped metal components, especially light-weight aluminum (Al) alloy. Facing the grow requirement of thermal stability for applications in aviation and aerospace at high temperatures, the poor thermal stability of Al alloy needs to be improved. Thus, in this study, we developed a novel heat-resistant eutectic Al-Fe-Ni alloy which is suitable for the SLM process. Firstly, the composition of Al-1.75Fe-1.25Ni (wt%) alloy was designed and confirmed through the calculation of hot crack susceptibility index |dT/d(fs0.5)| and the analysis of the as-cast microstructure. Then, the designed alloy was fabricated using the optimized SLM processing parameters. Finally, the effects of heat treatment on microstructure evolution and phase stability during thermal exposure were investigated. Results show that the SLMed alloy is consisted of α-Al and cellular eutectic Al9FeNi phases. The fine grain structure and nano-sized Al9FeNi phase of the SLMed sample result in high hardness which is more than twice higher than that of the as-cast sample. During long-term thermal exposure at 300 °C, the fine grain structure and cellular eutectic phase remain almost unchanged, and thus, the hardness of the alloy can be kept stable. When the exposure temperature further increased, the fine grains gradually grew up and the cellular Al9FeNi phases were gradually collapsed and coarsened. Heat treatment at such high temperature (above 400 °C) resulted in microstructure coarsening and formation of large-sized rod-like or spherical phases, which significantly degraded the hardness. The novel heat-resistant Al-Fe-Ni alloy together with the alloy composition design method provides new insight into light-weight and complex-shaped components produced by the SLM process for high-temperature applications.

Heat-resistant bulk nanostructured P/M aluminium

MMCs with Controlled Non-Uniform Distribution of Submicrometre Al2O3particles in 6061 Aluminium Alloy Matrix

Characteristics of heat resistant nanoquasicrystalline PM aluminum materials

Microstructure and Mechanical Properties of Selective Laser Melted Mg-9 Wt%al Powder Mixture

Powder metallurgical processing of Al matrix composite reinforced with AlSiCrMnFeNiCu high-entropy alloys: Microstructure, thermal stability, and microhardness

Requirements for Processing High-Strength AlZnMgCu Alloys with PBF-LB/M to Achieve Crack-Free and Dense Parts

A Novel Al–Cu Composite with Ultra‐High Strength at 350 °C via Dual‐Phase Particle Reinforced Submicron‐Structure

Bulk Nanostructure Formation Directly From The Multicomponent Alloy Melt

Fabrication of nanocrystalline supersaturated W–Al alloys with enhanced thermal stability and high sinterability

Enhanced mechanical properties of a novel heat resistant Al-based composite reinforced by the combination of nano-aluminides and submicron TiN particles

Preparation of an Aluminum Powder Composite with Double-Shell Nanostructure: Enhanced Thermal Conductivity Utilizing a Magnetic Orientation Effect

An Al-Al interpenetrating-phase composite by 3D printing and hot extrusion

Design, microstructure and thermal stability of a novel heat-resistant Al-Fe-Ni alloy manufactured by selective laser melting

Heat Treatable Al‐Zn‐Mg‐Cu Matrix Composites Reinforced With Ni‐Based Metallic Glass Powder

Heat treatment of bulk nanocrystalline Al-Zn-Mg-Cu alloy

A New Route to Bulk Nanostructured Multiphase Alloys with Ultrahigh Hardness

Heat-resistant Al alloys: microstructural design and microalloying effect

A high-strength heat-resistant Al−5.7Ni eutectic alloy with spherical Al3Ni nano-particles by selective laser melting

Preparation of bulk nanolaminated aluminum alloy with high strength

Evolution of Three-Dimensional Manganese-Based Nanoporous Structure under Thermal Processing

Bulk nanocrystalline aluminum 5083 alloy fabricated by a novel technique: Cryomilling and spark plasma sintering