Abstract:In this work, the gate controllability of WSe2 channel with varying thickness from monolayer to ten‐layer is investigated, by fabricating van der Waals contacted WSe2 devices. The findings demonstrate negligible hysteresis and excellent subthreshold swing observed when utilizing WSe2 channel thicknesses ≥ five‐layer. However, by reducing the WSe2 channel thickness below the trilayer, the subthreshold swing deviates from the thermal limit. The pursuit of near‐ideal subthreshold swing (SS) ≈ 60 mV dec−1 is a primary driving force to realize the power‐efficient field‐effect transistors (FETs). This challenge is particularly pronounced in 2D material‐based FETs, where the presence of a large interface trap density (Dit) imposes limitations on electrostatic control, consequently escalating power consumption. In this study, the gate controllability of 2D FETs is systematically analyzed by fabricating pre‐patterned van der Waals (vdW)‐contacted p‐FETs, varying the WSe2 channel thickness from monolayer to ten‐layer. As a result, the channel thickness is optimized to achieve efficient gate controllability while minimizing Dit. The findings demonstrate negligible hysteresis and excellent subthreshold swing (SSmin) close to the thermal limit (≈60 mV dec−1), with a corresponding Dit of ≈1010 cm−2 eV−1, comparable to Dit values observed in state‐of‐the‐art Si transistors, when utilizing WSe2 channel thicknesses ≥ five‐layer. However, reducing the WSe2 channel thickness below the trilayer, SSmin (≈91 mV dec−1) deviates from the thermal limit, attributed to a comparatively higher Dit (≈1011 cm−2 eV−1), despite the still lower than values reported for surface‐contacted 2D transistors. Furthermore, all devices exhibit consistent p‐type characteristics, featuring a high ION/IOFF ratio, high mobility, and excellent electrical stability confirmed over several months.

High-performance p-type field-effect transistors using substitutional doping and thickness control of two-dimensional materials

High Mobility 2D Palladium Diselenide Field-Effect Transistors with Tunable Ambipolar Characteristics.

Toward High-Performance p-Type Two-Dimensional Field Effect Transistors: Contact Engineering, Scaling, and Doping

Controllable Doping in 2D Layered Materials

P-type electrical contacts for two-dimensional transition metal dichalcogenides

A perspective on the doping of transition metal dichalcogenides for ultra-scaled transistors: Challenges and opportunities

Low Resistance Ohmic Contact to P-type Monolayer WSe2

Reversible Transition of Semiconducting PtSe2 and Metallic PtTe2 for Scalable All-2D Edge-Contacted FETs

Engineering Interfacial Charge Transfer through Modulation Doping for 2D Electronics

Modulating p-type doping of two dimensional material palladium diselenide

Precise P-Type and N-Type Doping of Two-Dimensional Semiconductors for Monolithic Integrated Circuits

Controllable p-type Doping of 2D WSe2 via Vanadium Substitution

Two-Dimensional ZrS2 and HfS2 for Making Sub-10 nm High-Performance P-Type Transistors

Chemical Synthesis and Integration of Highly Conductive PdTe2 with Low‐Dimensional Semiconductors for P‐type Transistors with Low Contact Barriers

Achieving Near‐Ideal Subthreshold Swing in P‐Type WSe2 Field‐Effect Transistors

Atomically Controlled Tunable Doping in High Performance WSe2 Devices

Transistors based on two-dimensional materials for future integrated circuits

Doping for ohmic contacts in 2D transistors

Chemical Synthesis and Integration of Highly Conductive PdTe 2 with Low‐Dimensional Semiconductors for p‐Type Transistors with Low Contact Barriers

Performance Limits and Advancements in Single 2D Transition Metal Dichalcogenide Transistor

Two-Dimensional ZrS 2 and HfS 2 for Making Sub-10 nm High-Performance P-Type Transistors