Abstract:Understanding the composition evolution of grain boundaries and grain boundary precipitation at near-atomic scale in aluminum alloys is crucial to tailor mechanical properties and to increase resistance to corrosion and stress corrosion cracking. Here, we elucidate the sequence of precipitation on grain boundaries in comparison to the bulk in a model Al-Zn-Mg-Cu alloy. We investigate the material from the solution heat treated state (475 °C), through the very early stages of aging to the peak aged state at 120 °C and further into the overaged regime at 180 °C. The process starts with solute enrichment on grain boundaries due to equilibrium segregation accompanied by solute depletion in their vicinity, the formation of Guinier–Preston (GP) zones in the solute-enriched grain boundary regions, and GP zones growth and transformation. The equilibrium segregation of solutes to grain boundaries during aging accelerates this sequence compared to the bulk. Analysis of the ∼10 nm wide precipitate-free zones (PFZs) adjacent to the solute-enriched grain boundaries shows that the depletion zones are determined by (i) interface equilibrium segregation; (ii) formation and coarsening of the grain boundary precipitates and (iii) the diffusion range of solutes in the matrix. In addition, we quantify the difference in kinetics between grain boundary and bulk precipitation. The precipitation kinetics, as observed in terms of volume fraction, average radius, and number density, is almost identical next to the depletion zone in the bulk and far inside the bulk grain remote from any grain boundary influence. This observation shows that the region influenced by the grain boundaries does not extend beyond the PFZs.

Regulating solute partitioning utilized to decorate grain boundary for improving corrosion resistance in a model Al-Cu-Mg alloy

Enhancing the intergranular corrosion resistance and mechanical properties of Al–Mg–xSi–Cu–Zn alloys by synergistic intergranular and intragranular precipitation behaviors

Segregation assisted grain boundary precipitation in a model Al-Zn-Mg-Cu alloy

Effects of grain boundary chemistry and precipitate structure on intergranular corrosion in Al-Mg-Si alloys doped with Cu and Zn

Manipulating Precipitation Through Thermomechanical Treatment to Control Corrosion Behavior of an Al–Cu–Mg Alloy

Improve Sensitization and Corrosion Resistance of an Al-Mg Alloy by Optimization of Grain Boundaries

Effect of grain structures and precipitation characteristics on the corrosion behaviour of Sc-containing Al-Cu-Li alloy

Atomic-scale study of compositional and structural evolution of early-stage grain boundary precipitation in Al–Cu alloys through phase-field crystal simulation

How solute atoms control aqueous corrosion of Al-alloys

A novel electromagnetic shock treatment to selectively modify grain boundary and improve the corrosion resistance of aluminium alloy

Understanding solute effect on grain boundary strength based on atomic size and electronic interaction

Effect of quenching protocols on microstructure and corrosion morphology in a recycled Al–Mg–Si alloy: Tracing Cu impurities

Influence of Grain Structure on Quench Sensitivity Relative to Localized Corrosion of High Strength Aluminum Alloy

Phase-field investigation of intergranular corrosion mechanism and kinetics in aluminum alloys

Grain Size-Dependent Sc Microalloying Effect on the Yield Strength-Pitting Corrosion Correlation in Al-Cu Alloys

Enhancing Plasticity in BCC Mg-Li-Al Alloys Through Controlled Precipitation at Grain Boundaries

The Effect of Cu and Sc on the Localized Corrosion Resistance of Al-Zn-Mg-X Alloys

Effect of gradient grain structures on corrosion resistance of extruded Al–Zn–Mg–Cu alloy

The dependence of precipitate morphology on the grain boundary types in an aged Al–Cu binary alloy

Mechanism for enhancing the corrosion resistance in a spray deposition aluminum alloy Al-8.31Zn-2.46Cu-2.07Mg-0.12Zr

Synergistic grain boundary engineering for achieving strength-ductility balance in ultrafine-grained high-Cr-bearing multicomponent alloys