Abstract:Precipitation at grain boundaries is typically not regarded as an efficient method for strengthening materials since it can induce grain boundary embrittlement, which detrimentally affects ductility. In this research, we developed a multi-principal element alloy (MPEA) with the composition Cr30Co30Ni30Al5Ti5 (at.%), incorporating both intragranular and intergranular nanoprecipitates. Utilizing multiscale, three-dimensional, and in-situ electron microscopy techniques, coupled with computational simulations, we established that intergranular nanoprecipitation in this material plays a crucial role in enhancing strength and promoting dislocation plasticity. The structure of intergranular nanoprecipitation comprises multiple phases with varying composition and structure. Despite the diversity, the crystal planes conducive to the easy glide of dislocations are well-matched, allowing for the sustained continuity of dislocation slipping across different phase structures. Simultaneously, this structure generates an undulated stress field near grain boundaries, amplifying the strengthening effect and facilitating multiple slip and cross-slip during deformation. Consequently, it promotes the proliferation and storage of dislocations. As a result, our material exhibits a yield strength of approximately 1010 MPa and an ultimate tensile strength of around 1500 MPa, accompanied by a significant fracture elongation of 41%. Our findings illuminate the potential for harnessing intergranular nanoprecipitation to optimize the strength-ductility trade-off in MPEAs, emphasizing the strategy of leveraging complex compositions for the design of sophisticated functional microstructures.

Corrosion resistance improvement of multi-principal element alloy by tailored structure with heterogeneous grains

Compositional Undulation Induced Strain Hardening and Delocalization in Multi-Principal Element Alloys

Correlation of microstructure, mechanical properties and corrosion behavior in a Ni34Co28Cr28Al10 multi-principal element alloy with outstanding corrosion resistance

Unveiling the Precipitation Behavior and Mechanical Properties in G-phase Strengthened CrFe2Ni2Ti0.2Six Multi-Principal Element Alloys

Effective combination of solid solution strengthening and precipitation hardening in NiCrFeWTiAl multi-principal element alloys

Achieving high strength and large ductility in a Cr30Co30Ni30Al5Ti5 alloy through intergranular precipitation

Tuning chemical short-range order for stainless behavior at reduced chromium concentrations in multi-principal element alloys

A new strong pearlitic multi-principal element alloy to withstand wear at elevated temperatures

Superior strength-ductility synergy of an oxide-dispersion strengthened CoCrNi-based multi-principal element alloy

Current progress in corrosion of multi principal element alloys

3D printed N-doped CoCrFeNi high entropy alloy with more than doubled corrosion resistance in dilute sulphuric acid

Computational design of non-equiatomic CoCrFeNi alloys towards optimized mechanical and surface properties

Corrosion of Ru-Free Ni-Fe-Cr-Mo-W-X Multi-Principal Element Alloys

Enhanced corrosion resistance of CoCrFeMnNi high entropy alloy using heterogeneous structure design

Composition design to tune the mechanical behavior of a TRIP-TWIP (CrMnFeCoNi)50 Fe50-xCrx multi-principal element alloys

Enhanced precipitation strengthening of multi-principal element alloys by κ- and B2-phases

Effects of Fe on microstructure and mechanical properties of CoCrNiFeAl multi-principle elements alloys

Effects of Al and Ti co-doping on the strength-ductility- corrosion resistance of CoCrFeNi-AlTi high-entropy alloys

Revealing the oxidation behavior of AlCr x FeNi lightweight multi-principal element alloys via experimental and first-principles calculations

Recent research progress on the passivation and selective oxidation for the 3d-transition-metal and refractory multi-principal element alloys

A Novel Martensitic-Like Transformation Fe-Based Multi-principal Element Alloy