Abstract:The effect of nano-CaO content on the microstructure, mechanical properties, and in vitro degradation performance of extruded Mg-1Zn alloys was investigated to enhance the strength and corrosion resistance of biodegradable materials for medical implants. The results showed that the addition of CaO nanoparticles effectively refined the size of dynamic recrystallization grains in the extruded composites. During the extrusion process, Ca 2 Mg 6 Zn 3 and Mg 2 Ca phases precipitated in the Mg-1Zn-0.5CaO and Mg-1Zn-1CaO composites, respectively. As the CaO content increased, the basal texture strength was elevated from 3.97 for the Mg-1Zn alloy to 12.05 for the Mg-1Zn-1CaO composite. Benefiting from the combined mechanisms of grain refinement, dislocation strengthening, and precipitation strengthening, the yield strength of the materials was fortified with an increase in CaO content. During the short immersion time, the matrix of the extruded Mg-1Zn-0.5CaO composite was preferentially corroded, resulting in the formation of a dense corrosion product layer that impeded the transport of ions in the electrolyte solution, thereby exhibiting the lowest annual corrosion rate. With an increase in the immersion time, galvanic corrosion destroyed the protective film, leading to a slightly higher corrosion rate in the extruded Mg-1Zn-0.5CaO composite compared to the Mg-1Zn alloy. The substantial nano-Mg 2 Ca phase particles were preferentially degraded, causing severe pitting corrosion in the extruded Mg-1Zn-1CaO composite, which exhibited the highest degradation rate. The extruded Mg-1Zn-0.5CaO composite exhibited superior overall properties; its yield strength, elongation, and annual corrosion rate after immersion (21 d) were 334.9 MPa, 8.9 %, and 1.06 mm/y, respectively.

Elucidating the dependence of corrosion behavior and mechanical property on the grain structure of low-temperature as-extruded Mg–Zn–Ca–Zr alloy

Effect of grain size and crystal orientation on the corrosion behavior of as-extruded Mg-6Gd-2Y-0.2Zr alloy

Effect of Microstructure Evolution on the Corrosion Behavior of Extrusion-Shearing Mg-3zn-Xca-0.6zr Alloys

Microstructure, mechanical properties and corrosion behavior of extruded Mg-Zn-Ca alloys with same Zn/Ca atomic ratio

Investigation on corrosion behavior and mechanical properties of an extruded Mg-Zn-Al-Sn-Mn alloy

Corrosion behavior and mechanical properties of extruded low-alloyed Mg−0.5Bi−0.5Y−0.2Zn alloy

Microstructure, Mechanical, and Corrosion Properties of Extruded Low-Alloyed Mg-xZn-0.2Ca Alloys

Effect of Extrusion Process on Microstructure, Corrosion Properties, and Mechanical Properties of Micro-Alloyed Mg–Zn–Ca–Zr Alloy

Corrosion Mechanism of the As-Cast and As-Extruded Biodegradable Mg-3.0Gd-2.7Zn-0.4Zr-0.1Mn Alloys.

In Vitro Corrosion of As-Extruded Mg–Ca Alloys—the Influence of Ca Concentration

Effect of grain size uniformity and crystallographic orientation on the corrosion behavior of Mg-2Zn-1Al bar

Microstructure and Corrosion Behavior of As-Extruded Mg-6.5Li-xY-yZn Alloys

Microstructure and Mechanical Properties of Extruded Mg–1Ca–1Zn–0.6Zr Alloy

The effects of Ca on the microstructure, mechanical and corrosion properties of extruded Mg-2Zn-0.5Mn alloy

Microstructure and corrosion properties of Mg–0.5Zn–0.2Ca–0.2Ce alloy with different processing conditions

Role of bimodal-grained structure with random texture on mechanical and corrosion properties of a Mg-Zn-Nd alloy

Investigating the mechanical properties and corrosion resistance of extruded Mg-1Zn-xCaO (x=0, 0.5, 1.0 wt%) materials

Effect of a bimodal grain structure on corrosion behavior and tensile properties of low-alloyed Mg-1Bi-1Zn-1Ag alloy

Influence of Microstructure on Corrosion Properties of Mg-6Zn-1Mn-0.5Ca Alloy in Simulated Body Fluid

Microstructure and corrosion behavior of as-homogenized and as-extruded Mg−xLi−3Al−2Zn−0.5Y alloys (x=4, 8, 12)

A newly developed Mg-Zn-Gd-Mn-Sr alloy for degradable implant applications: Influence of extrusion temperature on microstructure, mechanical properties and in vitro corrosion behavior