Design and Testing of a Prototype Pixellated CZT Detector and Shield for Hard X-Ray Astronomy

P. F. Bloser,J. E. Grindlay,T. Narita,J. A. Jenkins

DOI: https://doi.org/10.1117/12.366519

1999-10-14

Abstract:We report on the design and laboratory testing of a prototype imaging CZT detector intended for balloon flight testing in April 2000. The detector tests several key techniques needed for the construction of large-area CZT arrays, as required for proposed hard X-ray astronomy missions. Two 10 mm x 10 mm x 5 mm CZT detectors, each with a 4 x 4 array of 1.9 mm pixels on a 2.5 mm pitch, will be mounted in a ``flip-chip'' fashion on a printed circuit board carrier card; the detectors will be placed 0.3 mm apart in a tiled configuration such that the pixel pitch is preserved across both crystals. One detector is eV Products high-pressure Bridgman CZT, and the other is IMARAD horizontal Bridgman material. Both detectors are read out by a 32-channel VA-TA ASIC controlled by a PC/104 single-board computer. A passive shield/collimator surrounded by plastic scintillator surrounds the detectors on five sides and provides a ~45 deg field of view. The background spectrum recorded by this instrument will be compared to that measured by a single-element CZT detector (10 mm x 10 mm x 2 mm high-pressure Bridgman material from eV Products) fitted with the same passive/plastic collimator but including an active BGO shield to the rear. This detector has been previously flown by us completely shielded by a passive cover. We describe preliminary laboratory results for the various systems, discuss initial background simulations, and describe our plans for balloon flight tests.

Astrophysics,Instrumentation and Detectors

What problem does this paper attempt to address?

This paper aims to address several key technical challenges in hard X - ray astronomy, especially in the design and testing of prototype pixelated CZT (cadmium - zinc - telluride) detectors for balloon - flight experiments. Specifically, the paper focuses on the following main issues:

1. **Design and Fabrication of Large - Area CZT Detectors**:
- How to construct a large - area detector plane by closely arranging multiple small - sized pixelated CZT crystals while minimizing dead - space.
- How to read out thousands of pixels within a compact package and process the signal of each channel.

2. **Measurement and Reduction of Background Radiation**:
- The background level of detector systems in hard X - ray astronomy is a key issue. Since the signals from astronomical sources are weak in the hard X - ray range, it is necessary to minimize the detector background.
- The paper explores the effects of different shielding configurations on background radiation, especially the comparison between passive and active shielding. The author evaluates the effects of different shielding materials and thicknesses on background radiation through simulation and laboratory tests.

3. **Optimization of Detector Performance**:
- It explores how to overcome the poor hole - transport characteristics in CZT materials through special read - out electrode geometries, thereby improving energy resolution.
- It tests the performance of CZT crystals of different materials (such as CZT grown by the high - pressure Bridgman method and the horizontal Bridgman method) in practical applications, especially their differences in background radiation and performance.

4. **Design and Implementation of Balloon - Flight Experiments**:
- The paper describes a balloon - flight experiment planned for April 2000, which will carry two pixelated CZT detectors using different materials and shielding configurations.
- Through these experiments, researchers hope to verify the effectiveness of the above - mentioned technical solutions and provide data support for future wide - field hard X - ray survey telescopes (such as the EXIST or EXIST - LITE concepts).

In summary, through the design and testing of prototype detectors, this paper aims to solve the key problems of detector background radiation and large - area detector design in hard X - ray astronomy, and provide technical support for future large - scale astronomy missions.