Abstract:The detector material Cadmium Zinc Telluride (CZT) achieves excellent spatial resolution and good energy resolution over a broad energy range, several keV up to some MeV. Presently, there are two main methods to grow CZT crystals, the Modified High-Pressure Bridgman (MHB) and the High-Pressure Bridgman (HPB) process. The study presented in this paper is based on MHB CZT substrates from the company Orbotech Medical Solutions Ltd. [Orbotech Medical Solutions Ltd., 10 Plaut St., Park Rabin, P.O. Box 2489, Rehovot, Israel, 76124]. Former studies have shown that high-work-function materials on the cathode side reduce the leakage current and, therefore, improve the energy resolution at lower energies. None of the studies have emphasized on the anode contact material. Therefore, we present in this paper the result of a detailed study in which for the first time the cathode material was kept constant and the anode material was varied. We used four different anode materials: Indium, Titanium, Chromium and Gold, metals with work-functions between 4.1eV and 5.1eV. The detector size was 2.0×2.0×0.5cm3 with 8×8 pixels and a pitch of 2.46mm. The best performance was achieved with the low-work-function materials Indium and Titanium with energy resolutions of 2.0keV (at 59keV) and 1.9keV (at 122keV) for Titanium and 2.1keV (at 59keV) and 2.9keV (at 122keV) for Indium. Taking into account the large pixel pitch of 2.46mm, these resolutions are very competitive in comparison to those achieved with detectors made of material produced with the more expensive conventional HPB method. We present a detailed comparison of our detector response with 3D simulations. The latter comparisons allow us to determine the mobility-lifetime-products (μτ-products) for electrons and holes. Finally, we evaluated the temperature dependency of the detector performance and μτ-products. For many applications temperature dependence is important, therefore, we extended the scope of our study to temperatures as low as −30°C. There are two important results. The breakdown voltage increases with decreasing temperature, and electron mobility-lifetime-product decreases by about 30% over a range from 20°C to −30°C. The latter effect causes the energy resolution to deteriorate, but the concomitantly increasing breakdown voltage makes it possible to increase the applied bias voltage and restore the full performance.

Optimization of <= 200 um pitch CZT detectors for future high-resolution X-ray instrumentation in astrophysics

Study of Thick CZT Detectors for X-ray and Gamma-Ray Astronomy

Multipixel Characterization of Imaging CZT Detectors for Hard X-Ray Imaging and Spectroscopy

Advances in High-Energy-Resolution CdZnTe Linear Array Pixel Detectors with Fast and Low Noise Readout Electronics

Recent Progress in CdTe and CdZnTe Detectors

Probing the potential of CdZnTe for high-energy high-flux 2D X-ray detection using the XIDer incremental digital integrating readout

Imaging effects due to pixel distortions in CdZnTe (CZT) detectors -- results from the HREXI Calibration Facility (HCF)

Design and Optimization of Direct-Conversion Photon-Counting Detector for Dual-Energy Ct Imaging

Detailed studies of pixelated CZT detectors grown with the modified horizontal Bridgman method

Research on the Technological Progress of CZT Array Detectors

Characterization of the Uniformity of High-Flux CdZnTe Material

Test of Thick Pixelated Orbotech Detectors with and without Steering Grids

Optical Optimization for Anti-Coincidence Detectors of a Hard X-ray Modulation Telescope

Test of CZT Detectors with Different Pixel Pitches and Thicknesses

Thick Pixelated CZT Detectors With Isolated Steering Grids

Recent Progress on Developments and Characterization of Hybrid CMOS X-ray Detectors

Building Large Area CZT Imaging Detectors for a Wide-Field Hard X-ray Telescope - ProtoEXIST1

Improving the Spatial Resolution in CZT Detectors Using Charge Sharing Effect and Transient Signal Analysis: Simulation Study

Feasibility of using 3D CZT drift strip detectors for small Compton camera space missions

Evaluation of the performance of a CdZnTe-based soft -ray detector for CubeSat payloads

Impact of selenium addition to the cadmium-zinc-telluride matrix for producing high energy resolution X-and gamma-ray detectors