Abstract:Aluminum alloys are extensively used to manufacture mechanical components. However, when exposed to alkaline environments, like lubricants, refrigerants, or detergents, they can be corroded, reducing their durability. For this reason, the aim of this study is to investigate the influence of aggressive alkaline solutions (i.e., pH and presence of chlorides) on the corrosion resistance of three aluminum alloys (AA 5083-H111, AA 6082-T6, and AA 7075-T6) with and without anodizing treatments. Open circuit potential (EOCP) and anodic polarization measurements were carried out and typical corrosion parameters such as corrosion current density (icor) and corrosion rate (CR) were determined. Morphology of the corrosion attack and samples microstructure were investigated by scanning electron microscope. Results show that corrosion behavior of the three investigated alloys is influenced by (i) the aggressiveness of the testing environments; (ii) the thickness of the anodizing treatment; (iii) the alloy chemical composition; (iv) the distribution of intermetallic phases in the aluminum matrix. Moreover, three galvanic series have been built also testing other metallic alloys commonly used in mechanical applications, i.e., carbon steel (C40), stainless-steel (AISI 304), and Cu-based alloys (Cu-Ni alloy and CW 617 N, respectively). Results clearly indicate that galvanic series play a fundamental role when it is necessary to select an alloy for a specific environment, highlighting the thermodynamic conditions for corrosion occurrence. On the other hand, kinetic measurements and microstructural studies carried out on the three aluminum alloys stress the importance of the surface treatments and relevant thickness as well as the effect of metal exposure. Future work will involve the study of other surface treatments on aluminum alloys and the evaluation of their corrosion behavior in acidic environments.

Improving the Corrosion Resistance of Aluminum Alloys by Cathodic Polarization in Aqueous Media

Corrosion Behavior of Aluminum Alloys in Different Alkaline Environments: Effect of Alloying Elements and Anodization Treatments

Improving the Corrosion Behaviour of 6061 Aluminum Alloy by Controlled Anodic Formed Oxide Layer

Influence of Acid Pickling on Electrodeposition of Aluminum on Magnesium Alloy in Room Temperature Molten Salts

Anti-corrosion Performance of LY12 Al Alloy Reinforced by Anodic Oxidization and Silanization

Corrosion of Aluminum Alloy Metal Matrix Composites in Neutral Chloride Solutions

Corrosion Behavior of Al Modified with Zn in Chloride Solution

How solute atoms control aqueous corrosion of Al-alloys

Corrosion Behavior of Aluminum Bronze under Thin Electrolyte Layers Containing Artificial Seawater

Improved Corrosion Protection of Aluminum Alloys by Electrodeposited Silanes

Predicting Galvanic Corrosion of Aluminum Using Accelerated Laboratory Electrochemical Experiments

Corrosion and Electrochemical Behaviors of Pure Aluminum in Novel KOH‐ionic Liquid‐water Solutions

Corrosion Behaviour of Az21, Az501 and Az91 in Sodium Chloride

Improving the Corrosion Resistance of Aluminum Alloy by Creating a Superhydrophobic Surface Structure through a Two-Step Process of Etching Followed by Polymer Modification

Effect of Electropolishing of Metals and Alloys in a Deep Eutectic Solvent on Their Corrosion Characteristics

Interplay between Anodizing Parameters and Corrosion Resistance of Aluminum-Silicon Alloys

ELECTROCHEMICAL FEATURES OF THE CORROSION OF AN ALUMINUM-LITHIUM ALLOY IN 3.0% NaCl SOLUTION

A mechanistic study on localized corrosion of sandwich multi-layered aluminium sheet in 3.5 wt.% NaCl solution

Cathodic protection of aluminium in seawater

Electrochemical Corrosion Behavior of Biomedical Ti–22Nb and Ti–22Nb–6Zr Alloys in Saline Medium