Corrosion Behavior of Aluminum Alloys in Different Alkaline Environments: Effect of Alloying Elements and Anodization Treatments

Riccardo Fabris,Giulia Masi,Maria Chiara Bignozzi
DOI: https://doi.org/10.3390/coatings14020240
IF: 3.236
2024-02-19
Coatings
Abstract:Aluminum alloys are extensively used to manufacture mechanical components. However, when exposed to alkaline environments, like lubricants, refrigerants, or detergents, they can be corroded, reducing their durability. For this reason, the aim of this study is to investigate the influence of aggressive alkaline solutions (i.e., pH and presence of chlorides) on the corrosion resistance of three aluminum alloys (AA 5083-H111, AA 6082-T6, and AA 7075-T6) with and without anodizing treatments. Open circuit potential (EOCP) and anodic polarization measurements were carried out and typical corrosion parameters such as corrosion current density (icor) and corrosion rate (CR) were determined. Morphology of the corrosion attack and samples microstructure were investigated by scanning electron microscope. Results show that corrosion behavior of the three investigated alloys is influenced by (i) the aggressiveness of the testing environments; (ii) the thickness of the anodizing treatment; (iii) the alloy chemical composition; (iv) the distribution of intermetallic phases in the aluminum matrix. Moreover, three galvanic series have been built also testing other metallic alloys commonly used in mechanical applications, i.e., carbon steel (C40), stainless-steel (AISI 304), and Cu-based alloys (Cu-Ni alloy and CW 617 N, respectively). Results clearly indicate that galvanic series play a fundamental role when it is necessary to select an alloy for a specific environment, highlighting the thermodynamic conditions for corrosion occurrence. On the other hand, kinetic measurements and microstructural studies carried out on the three aluminum alloys stress the importance of the surface treatments and relevant thickness as well as the effect of metal exposure. Future work will involve the study of other surface treatments on aluminum alloys and the evaluation of their corrosion behavior in acidic environments.
materials science, multidisciplinary,physics, applied, coatings & films
What problem does this paper attempt to address?
The problem this paper attempts to address is the study of the corrosion behavior of aluminum alloys in different alkaline environments and the influencing factors. Specifically, the research aims to explore the corrosion performance of three aluminum alloys (AA 5083-H111, AA 6082-T6, and AA 7075-T6) after anodizing treatment in different alkaline solutions (such as the presence of pH and chloride ions). The study determines typical corrosion parameters, such as corrosion current density (i_cor) and corrosion rate (CR), by measuring the open circuit potential (E_OCP) and anodic polarization curves. Additionally, scanning electron microscopy (SEM) is used to analyze the morphology of corrosion attacks and the microstructure of the samples. The results indicate that the corrosion behavior of aluminum alloys is influenced by the following factors: 1. **Corrosiveness of the test environment**: The strength of the corrosiveness of the alkaline solution. 2. **Thickness of the anodizing treatment**: The impact of different thicknesses of the oxide layer on corrosion. 3. **Alloy chemical composition**: The influence of the presence of different elements on corrosion. 4. **Distribution of intermetallic phases in the aluminum matrix**: The role of these phases in the corrosion process. Furthermore, the study also constructs three galvanic series and tests the corrosion behavior of other commonly used metal alloys (such as carbon steel, stainless steel, and copper-based alloys) in the same alkaline environments. The results show that the galvanic series is significant for selecting alloy materials in specific environments.